For car enthusiasts looking to add more security and convenience to their vehicles, the Viper 5×05 remote start and alarm system is a popular choice. However, installation can be daunting without proper guidance. In this article, we will provide a comprehensive guide on Viper 5×05 wiring diagram and installation.
Wiring Diagram
Before we start with the installation process, it is important to understand the wiring diagram for Viper 5×05. Here is a breakdown of what each wire is used for:
| Wire Color | Description |
|---|---|
| Yellow | Ignition 1 input |
| Red | Ignition 2 input |
| Green/White | Ground when armed output |
| Orange | Accessory output |
| Brown/White | Starter output |
| White/Green | Neutral safety wire input |
| Violet/White | Door trigger input |
| Blue/White | Trunk trigger input |
| Gray/Black | Parking brake wire input |
| Green/Red | Ignition 1 wire output |
| Black/White | Ground wire input |
| Pink/White | Ignition 2 wire output |
| Blue/Red | Door lock wire output |
| Blue/Black | Door unlock wire output |
| Green/Black | Door lock/unlock input |
It is important to note that the wiring diagram may vary depending on the make and model of your vehicle. Make sure to check the manual before starting the installation process.
Installation Process
The installation process of Viper 5×05 is relatively straightforward if you have basic knowledge of car wiring. Here is a step-by-step guide:
Step 1: Gather the Required Tools
Before starting the installation, make sure you have the necessary tools at hand. Here is a list of tools you will need:
- Wire stripper
- Wire crimps
- Screwdriver set
- Drill with drill bits
- Tape measure
- Zip ties
Step 2: Mount the Control Module
The control module should be mounted in a secure and dry location. Make sure it is away from any moving parts and the engine compartment. Use the screws provided to mount the control module.
Step 3: Connect the Wiring
Using the Viper 5×05 wiring diagram, connect the wires to their respective locations. Use wire crimps to secure the connections.
Step 4: Install the Shock Sensor
Find a suitable location for the shock sensor and drill a hole for the wires. Connect the wires to the shock sensor and mount it using screws.
Step 5: Test the System
Before finishing the installation, test the system to ensure it is working properly. Make sure all connections are secure and the wiring is correctly routed.
FAQ
Q: Can I install Viper 5×05 on my own?
A: Yes, with some basic knowledge of car wiring and the right tools, you can install Viper 5×05 on your own. However, if you are not comfortable working with car wiring, it is recommended to seek professional help.
Q: Will Viper 5×05 work with my vehicle?
A: Viper 5×05 is compatible with most vehicles. However, it is important to check the manual to ensure compatibility with your vehicle make and model.
Q: Is Viper 5×05 difficult to use?
A: No, Viper 5×05 is designed to be user-friendly. The remote control is easy to use and comes with clear instructions.
Q: How much does Viper 5×05 cost?
A: The cost of Viper 5×05 varies depending on the retailer and installation fees. On average, it can range from $300 to $500.
Q: What is the range of the Viper 5×05 remote control?
A: The range of the Viper 5×05 remote control is up to one mile in ideal conditions.
Q: Can I add more features to Viper 5×05?
A: Yes, Viper 5×05 can be customized with additional features such as GPS tracking, smartphone integration, and more.
Conclusion
By following this guide, you should be able to install Viper 5×05 on your own with ease. Make sure to follow the wiring diagram carefully and test the system before completing the installation process. With Viper 5×05, you can have added security and convenience for your vehicle.
