If you are looking for a complete guide on Rockford Fosgate Prime R500x1d wiring diagram, you have landed on the right page. This article will cover everything you need to know about installing the Rockford Fosgate Prime R500x1d amplifier in your car, truck or any other vehicle.
Overview
The Rockford Fosgate Prime R500x1d is a high-performance Mono amplifier that delivers 500 Watts at 2 Ohms, making it an ideal choice for powering subwoofers. It features a compact design and comes equipped with various features that provide a high-quality audio performance.
Specifications
The following are the specifications of the Rockford Fosgate Prime R500x1d amplifier:
| Specification | Value |
|---|---|
| Power Output | 500 Watts x 1@2-Ohms |
| Dimensions (H x W x D) | 2.38″ x 7.76″ x 9.90″ |
| Frequency Response | 20Hz to 250Hz +/-1dB |
| Input Sensitivity | 150mV to 4V |
| Signal-to-Noise Ratio | 100dB |
Features
The following are the features of the Rockford Fosgate Prime R500x1d amplifier:
- Class-D Amplifier
- MOSFET Power Supply
- Remote Punch Level Control
- 12dB/Octave Butterworth Crossover
- Thermal and Overload Protection Circuitry
- 2-Ohm Stable
- On-Board Punch EQ with +18dB boost at 45Hz
Installation
The installation process of the Rockford Fosgate Prime R500x1d amplifier is simple and straightforward. Follow the steps below to install the amplifier:
Step 1: Disconnect the Battery
The first step is to disconnect the negative terminal of the battery to prevent any electrical shocks and damage to the vehicle’s electrical system.
Step 2: Mount the Amplifier
Mount the amplifier in a secure location using screws or bolts, ensuring that it is not in contact with any metal parts of the vehicle that may cause electrical interference. It is recommended to mount the amplifier in the trunk or under a seat.
Step 3: Run the Power and Ground Wires
Run the power wire from the battery’s positive terminal to the amplifier’s positive terminal, making sure to use an appropriate fuse holder near the battery. Run the ground wire from the amplifier’s negative terminal to a metal part of the vehicle’s chassis.
Step 4: Connect the Remote Wire
Connect the remote wire from the amplifier to a remote turn-on lead on the head unit or to a separate remote turn-on switch.
Step 5: Connect the RCA Cables
Connect the RCA cables from the head unit to the amplifier’s RCA inputs.
Step 6: Set the Gain
Set the gain on the amplifier using a multimeter and a test tone to ensure that the amplifier is not overdriven.
Step 7: Reconnect the Battery
Reconnect the negative terminal of the battery and test the amplifier to ensure that it is working correctly.
FAQ
Q1. What is the Rockford Fosgate Prime R500x1d amplifier?
The Rockford Fosgate Prime R500x1d is a high-performance Mono amplifier that delivers 500 Watts at 2 Ohms, making it an ideal choice for powering subwoofers.
Q2. What are the features of the Rockford Fosgate Prime R500x1d amplifier?
The features of the Rockford Fosgate Prime R500x1d amplifier include Class-D Amplifier, MOSFET Power Supply, Remote Punch Level Control, 12dB/Octave Butterworth Crossover, Thermal and Overload Protection Circuitry, 2-Ohm Stable, and On-Board Punch EQ with +18dB boost at 45Hz.
Q3. How do I install the Rockford Fosgate Prime R500x1d amplifier?
The installation process of the Rockford Fosgate Prime R500x1d amplifier is simple and straightforward. Follow the steps mentioned above to install the amplifier.
Q4. Where should I mount the Rockford Fosgate Prime R500x1d amplifier?
It is recommended to mount the Rockford Fosgate Prime R500x1d amplifier in the trunk of the vehicle or under a seat, ensuring that it is not in contact with any metal parts of the vehicle that may cause electrical interference.
Q5. How do I set the gain on the Rockford Fosgate Prime R500x1d amplifier?
You can set the gain on the Rockford Fosgate Prime R500x1d amplifier using a multimeter and a test tone to ensure that the amplifier is not overdriven.
