Wiring Diagram for Ram Tow Mirrors

If you own a Ram truck and need to tow a trailer, a set of towing mirrors can make all the difference. Towing mirrors provide a wider field of view, allowing you to see everything behind your trailer. However, installation can be tricky, especially when it comes to wiring. In this article, we’ll provide a step-by-step guide to wiring your Ram tow mirrors.

What You’ll Need

Before you get started, you’ll need a few things:

Item Quantity
Tow mirrors 2
Screwdriver 1
Socket wrench 1
Wire stripper 1
Electrical tape 1 roll
Zip ties 10

Once you have everything you need, it’s time to get started.

Step 1: Remove the Old Mirrors

The first thing you need to do is remove the old mirrors. Use the socket wrench to remove the bolts holding the old mirrors in place. Gently pull the mirror away from the truck until it comes loose. Repeat this process on the other side.

FAQ:

Do I need to disconnect the wiring?

No, you do not need to disconnect the wiring. The wiring for the mirrors is located inside the truck.

Can I reuse the bolts?

Yes, you can reuse the bolts as long as they are in good condition.

Step 2: Install the New Mirrors

Now that the old mirrors are removed, it’s time to install the new towing mirrors. Line up the holes on the new mirrors with the holes on the truck and secure them with the bolts. Tighten the bolts using the socket wrench.

FAQ:

Do I need to use any special tools to install the mirrors?

No, you do not need any special tools. A socket wrench and screwdriver are all you need.

Do I need to adjust the mirrors?

Yes, you will need to adjust the mirrors once they are installed. Follow the manufacturer’s instructions for adjusting the mirrors.

Step 3: Wire the Mirrors

The final step is to wire the new mirrors. This can be a bit tricky, but with a little patience, you can do it yourself.

FAQ:

Where is the wiring located?

The wiring for the mirrors is located inside the door panel on the driver’s side.

What color wires do I need to connect?

The color of the wires can vary depending on the year and model of your truck. Check the wiring diagram for your specific vehicle to determine which wires to connect.

Do I need to splice the wires?

Yes, you will need to splice the wires to connect the new mirrors.

What if I’m not comfortable splicing the wires?

If you’re not comfortable splicing the wires, you can take your truck to a professional to have the wiring done for you.

Conclusion

Wiring your Ram tow mirrors can seem daunting, but with a little patience and know-how, you can do it yourself. Just remember to follow the manufacturer’s instructions carefully and take your time. Before you know it, you’ll have a set of towing mirrors that will make all the difference when hauling your trailer.