Emergency LED drivers are vital components of any lighting system that ensures uninterrupted lighting in case of a power failure. BSL310 is an emergency LED driver that is widely used for this purpose. In this article, we will discuss the wiring diagram of the BSL310 emergency LED driver in detail. We will also answer some frequently asked questions related to the wiring of the BSL310.
What is BSL310 Emergency LED Driver?
BSL310 is an emergency LED driver that is designed to provide backup power to LED lighting fixtures in the event of a power failure. It is a UL-listed device that is compatible with LED fixtures of up to 10 watts.
The BSL310 emergency LED driver is a self-contained unit that can be installed in the fixture or remote location. It provides constant power to the LED fixture during normal operation and automatically switches to emergency mode when power is lost. It can operate for up to 90 minutes at full power during a power outage.
Wiring Diagram of BSL310 Emergency LED Driver
Wiring of the BSL310 emergency LED driver is quite simple and straightforward. The following steps explain how to wire the BSL310 to your LED fixture:
Step 1:
Turn off the power supply to the LED fixture and disconnect it from the power source.
Step 2:
Connect the red wire from the BSL310 to the positive (+) wire of the LED fixture.
Step 3:
Connect the black wire from the BSL310 to the negative (-) wire of the LED fixture.
Step 4:
Connect the blue and white wires from the BSL310 to the AC power source. Connect the blue wire to the neutral wire and the white wire to the hot wire.
Step 5:
Turn on the power supply and test the LED fixture to ensure everything is functioning correctly.
FAQs
Q. How many LED fixtures can be connected to one BSL310?
A. The BSL310 is designed to operate with one LED fixture only. Connecting multiple fixtures to one BSL310 is not recommended.
Q. Can the BSL310 be used with all types of LED fixtures?
A. No, the BSL310 is only compatible with LED fixtures of up to 10 watts. Using it with higher wattage LED fixtures may damage the BSL310 and void the warranty.
Q. Can the BSL310 be operated in extreme temperatures?
A. The BSL310 is designed to operate in a temperature range of 0° to 50°C. Operating it outside this temperature range may damage the unit.
Q. Can the BSL310 be installed in wet locations?
A. No, the BSL310 is not suitable for installation in wet locations. It should be installed in dry locations only.
Q. Is it necessary to use a licensed electrician for installing the BSL310?
A. Yes, it is recommended to use a licensed electrician for installing the BSL310. Improper installation may cause damage to the unit and pose a safety hazard.
Conclusion
The BSL310 emergency LED driver is a vital component of any lighting system that ensures uninterrupted lighting in case of a power failure. Wiring the BSL310 is simple and straightforward, as explained in this article. By following the steps mentioned above, you can wire the BSL310 to your LED fixture and ensure reliable backup power during a power outage.
It is important to remember that the BSL310 should only be used with compatible LED fixtures of up to 10 watts. Improper usage may damage the unit and pose a safety hazard. If you have any further questions or doubts about the wiring of BSL310, it is recommended to consult a licensed electrician.
