Rule 2000 Bilge Pump Wiring Diagram: A Comprehensive Guide

As an essential component of any boat, the bilge pump must be wired correctly for optimal performance. The Rule 2000 bilge pump is a popular choice for many boaters, and in this article, we will provide a detailed guide on how to wire it properly. From installation to troubleshooting, we will cover everything you need to know about the Rule 2000 bilge pump wiring diagram.

Introduction to Rule 2000 Bilge Pump

The Rule 2000 bilge pump is a high-capacity pump that can deliver up to 2000 gallons of water per hour. It is designed to be installed in the bilge area of the boat to remove excess water and keep the bilge dry. The Rule 2000 bilge pump is a reliable and efficient pump that can help prevent water damage and keep your boat safe.

Before we dive into the wiring diagram, let’s first take a look at the different components of the Rule 2000 bilge pump:

Component Description
Bilge Pump The main pump unit that removes water from the bilge.
Float Switch A switch that activates the pump when the water level rises above a certain point.
Fuse A safety device that protects the wiring from overload or short circuits.
Wiring The electrical connections that power the pump and control its operation.

Wiring Diagram for Rule 2000 Bilge Pump

The Rule 2000 bilge pump wiring diagram consists of three components: the pump, the float switch, and the fuse. Each component must be wired correctly for the system to work properly. Here is the wiring diagram:

Step 1: Connect the positive (+) terminal of the battery to the “B+” terminal on the pump.

Step 2: Connect the negative (-) terminal of the battery to the “B-” terminal on the pump.

Step 3: Connect the float switch to the pump by wiring the switch’s brown wire to the pump’s “A +” terminal and the black wire to the pump’s “A -” terminal.

Step 4: Connect the fuse to the positive (+) wire between the battery and the pump. The fuse should be rated for the maximum amperage of the pump.

Step-by-Step Guide on How to Install Rule 2000 Bilge Pump

Now that you have the wiring diagram, let’s take a look at how to install the Rule 2000 bilge pump. Here is a step-by-step guide:

Step 1: Choose a location in the bilge area where the pump will be installed. Make sure the location is easily accessible and provides enough space for the pump to operate.

Step 2: Drill a hole in the bilge area for the pump’s intake hose. The hole should be large enough to allow water to flow into the pump but small enough to prevent debris from entering the hose.

Step 3: Install the pump in the chosen location by securing it with screws or bolts. Make sure the pump is level and secure.

Step 4: Connect the float switch to the pump following the wiring diagram. The switch should be mounted in a location where it can detect rising water levels in the bilge.

Step 5: Connect the wiring to the battery and the fuse. Make sure the wiring is secure and free from any damage or fraying.

Step 6: Test the pump by pouring water into the bilge area or by manually activating the float switch. The pump should turn on and begin pumping water out of the bilge.

FAQs

Here are some frequently asked questions about Rule 2000 bilge pump wiring diagram:

Q: What size wire should I use for the pump?

A: The wire size depends on the distance between the pump and the battery. For distances of up to 6 feet, use 16-gauge wire. For distances of up to 14 feet, use 14-gauge wire. For distances of up to 22 feet, use 12-gauge wire.

Q: How do I know if the fuse is blown?

A: If the pump is not working, the first thing to check is the fuse. Look for signs of damage or discoloration on the fuse. If the fuse is blown, replace it with a new one of the same amperage.

Q: How often should I test the pump?

A: It is recommended to test the pump at least once a month to ensure it is working properly. You should also test the pump before going out on a boat trip to make sure it is ready for use.

Conclusion

The Rule 2000 bilge pump is an important component of any boat, and wiring it correctly is crucial for its performance. With this comprehensive guide, you should now have a good understanding of how to wire the Rule 2000 bilge pump and install it properly. If you have any questions or concerns, consult a professional electrician or boat mechanic for assistance.