If you are looking for a reliable and efficient way to control your lights, the Lutron Diva dimmer switch is a great option. This switch allows you to adjust the brightness of your lights to create the perfect ambiance for any room. In this article, we will discuss the wiring diagram for the Lutron Diva dimmer switch, as well as frequently asked questions.
Wiring Diagram
The Lutron Diva dimmer switch requires a neutral wire, which can be identified by its white insulation. The switch has two black wires and a green grounding wire. The black wires are for the hot wire and the load wire. The following is the wiring diagram for the Lutron Diva dimmer switch:
| Wire Color | Function |
|---|---|
| Green | Ground |
| Black | Hot |
| Black | Load |
| White | Neutral |
The following is a step-by-step guide on how to wire the Lutron Diva dimmer switch:
Step 1: Turn Off Power
Before starting any electrical work, make sure to turn off the power to the circuit you will be working on. This can be done by turning off the breaker or removing the fuse.
Step 2: Remove Old Switch
Remove the old switch’s cover plate and unscrew it from the wall or switch box. Gently pull the switch out and unscrew the wires from it. Be sure to label the wires for easy identification later.
Step 3: Connect Ground Wire
Connect the green grounding wire from the Lutron Diva dimmer switch to the grounding wire in the switch box. This is usually a bare copper wire.
Step 4: Connect Neutral Wire
Connect the white neutral wire from the Lutron Diva dimmer switch to the neutral wire in the switch box. This wire is typically white.
Step 5: Connect Hot Wire
Connect one of the black wires from the Lutron Diva dimmer switch to the hot wire in the switch box. This wire is typically black and will be identified by a “hot” or “power” label.
Step 6: Connect Load Wire
Connect the other black wire from the Lutron Diva dimmer switch to the load wire in the switch box. This wire is typically red, black, or blue and will be connected to the light fixture.
Step 7: Test the Switch
Screw the switch back into the switch box and attach the cover plate. Turn the power back on and test the switch to make sure it works properly.
FAQ
1. Can the Lutron Diva dimmer switch be used with LED lights?
Yes, the Lutron Diva dimmer switch can be used with LED lights. However, make sure to check the switch’s compatibility with the specific LED lights you are using, as not all LED lights are compatible with dimmer switches.
2. Can the Lutron Diva dimmer switch be used with a ceiling fan?
No, the Lutron Diva dimmer switch is not designed to be used with a ceiling fan. Use a fan speed controller instead.
3. Can the Lutron Diva dimmer switch be used in a three-way setup?
Yes, the Lutron Diva dimmer switch can be used in a three-way setup. However, you will need to purchase a separate three-way switch to complete the setup.
4. Can the Lutron Diva dimmer switch be used with incandescent lights?
Yes, the Lutron Diva dimmer switch can be used with incandescent lights. However, its compatibility with other types of lights may vary.
5. Can the Lutron Diva dimmer switch be used in an outdoor setting?
No, the Lutron Diva dimmer switch is not designed for outdoor use. It is only suitable for indoor settings.
Overall, the Lutron Diva dimmer switch is a great option for controlling the brightness of your lights. With the proper wiring and installation, this switch can provide a lot of functionality and convenience in your home.
