Are you in the process of installing new air horns on your vehicle and need to know how to properly wire them? Look no further than this comprehensive guide to wiring your Kleinn air horns. With clear diagrams and step-by-step instructions, you will be able to successfully install your air horns and enjoy their powerful sound in no time.
What You’ll Need
Before getting started, make sure you have all the necessary tools and materials to complete the wiring process:
| Materials | Tools |
|---|---|
| – Kleinn air horns | – Wire cutters/strippers |
| – Wiring harness | – Crimping tool |
| – Relay | – Screwdriver |
| – Fuse holder and fuse | – Electrical tape |
Wiring Process
Follow these step-by-step instructions to properly wire your Kleinn air horns:
Step 1: Mount Relay
The first step is to locate a suitable location to mount the relay. Choose a location near the battery where the wiring harness can reach all necessary components. Use the screwdriver to mount the relay securely.
Step 2: Connect Power Source
Using wire cutters/strippers, cut a length of wire to connect the power source to the relay. Crimp a ring terminal to each end of the wire and connect one end to the positive terminal on the battery and the other end to the “30” terminal on the relay.
Step 3: Connect Ground
Cut a length of wire to connect the ground to the relay. Crimp a ring terminal to one end and connect it to the negative terminal on the battery. Connect the other end to the “85” terminal on the relay.
Step 4: Connect Horns to Relay
Cut a length of wire to connect the horns to the relay. Crimp a female spade connector to each end of the wire. Connect one end to the “86” terminal on the relay and the other end to the positive terminal on the first horn. Connect the second horn to the first horn using a male spade connector.
Step 5: Add Fuse Holder
Install the fuse holder by cutting a length of wire to connect the “87” terminal on the relay to one end of the fuse holder. Using wire cutters/strippers, remove a small section of insulation from each end of the wire and crimp on ring terminals. Attach one end of the wire to the “87” terminal on the relay and the other end to one side of the fuse holder. Connect the other side of the fuse holder to a ground location using a ring terminal.
Step 6: Connect Wiring Harness
Plug the wiring harness into the relay and connect the other end to the horn button in your vehicle. Test the horns to ensure they are working properly.
FAQ
What size wire should I use for the power and ground?
For best results, use 10-12 gauge wire for the power and ground connections.
Do I need to use a relay for the air horns?
Yes, a relay is necessary to properly control the high current draw of the air horns and prevent damage to your electrical system.
No, the horn button is not designed to handle the high current draw of the air horns and could cause damage to your electrical system. The wiring harness and relay are necessary for proper and safe operation of the air horns.
What type of fuse should I use?
Use a 20 amp fuse for the best protection against electrical damage.
Can I install the air horns myself?
While it is possible to install the air horns yourself, it is recommended to have a professional technician perform the installation to ensure proper wiring and safe operation of the air horns.
Conclusion
With this comprehensive guide, you are equipped with all the necessary information to properly wire your Kleinn air horns. Remember to always prioritize safety and follow the instructions carefully for best results. Once your air horns are installed, enjoy the powerful sound and attention-grabbing presence they add to your vehicle.
