125cc Pit Bike Kick Start Wiring Diagram: A Comprehensive Guide

Are you looking for a wiring diagram for your 125cc pit bike kick start? Look no further. In this article, we will provide you with a comprehensive guide on how to wire your 125cc pit bike kick start. Whether you are a seasoned mechanic or just starting, this guide will help you to get your bike running smoothly in no time.

What You Need

Before we dive into the wiring diagram, here is a list of things that you will need:

Item Quantity
125cc pit bike kick start 1
Wiring harness 1
Spark plug 1
Spark plug wrench 1
Wire cutters 1
Wire strippers 1
Tape measure 1
Screwdriver set 1
Socket set 1

Step-by-Step Guide

Follow these simple steps to wire your 125cc pit bike kick start:

Step 1: Remove the Seat and Fuel Tank

The first step is to remove the seat and fuel tank from your pit bike to get access to the wiring harness. Use your socket set to loosen the bolts that hold the seat and fuel tank in place. Carefully remove the seat and fuel tank from your bike.

Step 2: Locate the Wiring Harness

Once you have removed the seat and fuel tank, you should be able to see the wiring harness. This is a bundle of wires that run along the frame of your bike. Use your tape measure to measure the length of the wiring harness to make sure that it is long enough to reach all the necessary components.

Step 3: Connect the Battery

Before you start wiring your pit bike, make sure that the battery is fully charged. Connect the positive wire from the wiring harness to the positive terminal on the battery. Connect the negative wire from the wiring harness to the negative terminal on the battery.

Step 4: Install the Spark Plug

Install the spark plug into the spark plug socket using your spark plug wrench. Connect the spark plug wire to the spark plug. Make sure that the spark plug wire is securely in place.

Step 5: Connect the Kill Switch

The kill switch is a safety feature that shuts off the engine in case of an emergency. Connect the kill switch wire from the wiring harness to the kill switch on your pit bike.

Step 6: Connect the Ignition Coil

The ignition coil is responsible for providing the spark to ignite the fuel in the engine. Connect the ignition coil wire from the wiring harness to the ignition coil on your pit bike.

Step 7: Connect the CDI Box

The CDI box is the brain of your pit bike. It controls the timing of the spark and other important functions. Connect the CDI box wire from the wiring harness to the CDI box on your pit bike.

Step 8: Connect the Starter Motor

The starter motor is responsible for starting the engine. Connect the starter motor wire from the wiring harness to the starter motor on your pit bike.

Step 9: Test Your Wiring

Once you have completed wiring your pit bike, it is time to test it. Turn on the ignition and kick start your bike. Check to make sure that everything is working properly. If there are any issues, refer back to the wiring diagram and make the necessary adjustments.

FAQ

What is a wiring harness?

A wiring harness is a bundle of wires that run along the frame of your pit bike. It is responsible for connecting all the components of your pit bike together and providing power to them.

What is a CDI box?

A CDI box is a small electronic device that controls the timing of the spark and other important functions of your pit bike.

What is a kill switch?

A kill switch is a safety feature that shuts off the engine in case of an emergency.

What is an ignition coil?

An ignition coil is responsible for providing the spark to ignite the fuel in the engine of your pit bike.

What is a starter motor?

A starter motor is responsible for starting the engine of your pit bike.

Now that you have a comprehensive guide on how to wire your 125cc pit bike kick start, it is time to get started. Remember to take your time and follow the steps carefully. Happy wiring!