2017 Jeep Cherokee Radio Wiring Diagram

If you are looking for a guide on how to install a new radio in your 2017 Jeep Cherokee, you have come to the right place. In this article, we will provide you with a detailed wiring diagram that will help you install your new radio in no time.

Step-by-Step Guide

Before you start the installation process, it is important to gather all the tools and materials that you will need. You will need a new radio, a wiring harness, a mounting kit, a screwdriver, wire crimps, and electrical tape.

Once you have all the materials, follow these steps:

Step 1: Disconnect the Battery

The first thing you need to do is to disconnect the negative terminal of your car battery. This will prevent any electrical damage to your car’s electrical system and ensure your safety during the installation process.

Step 2: Remove the Old Radio

Now that the battery is disconnected, remove the old radio from its mount by unscrewing the bolts around the radio or using a pry tool to remove the trim panel around the radio. Remove the wiring harness and antenna cable from the back of the old radio.

Step 3: Install the Mounting Kit

The mounting kit should come with detailed instructions on how to install it. Follow the instructions carefully to install the kit in your car. This kit will help you mount the new radio securely in your car.

Step 4: Connect the Wiring Harness

The wiring harness is a plug-and-play device that connects your car’s original wiring to the new radio’s wiring. Connect the wires in the harness to the corresponding wires on the new radio. Refer to the wiring diagram provided below for guidance.

Step 5: Test the Radio

Before you put everything back together, test the radio to make sure it is working properly. Connect the battery and turn on the radio to see if it is functioning correctly.

Step 6: Reassemble the Dashboard

Once you are sure that the new radio is working, reassemble the dashboard by reinstalling any trim panels that you removed earlier.

That’s it! You have successfully installed a new radio in your 2017 Jeep Cherokee.

Wiring Diagram

Here is a detailed wiring diagram that you can refer to during the installation process:

Wire Color Function New Radio Wire Color
Yellow Battery Yellow
Red Accessory Red
Black Ground Black
Orange/White Illumination Orange
Blue/White Amp Turn-On Blue
Green/Black Left Rear Speaker Positive Green
Green/Yellow Left Rear Speaker Negative Green with Black Stripe
Brown/Black Right Rear Speaker Positive Purple
Brown/Yellow Right Rear Speaker Negative Purple with Black Stripe
Grey/Black Left Front Speaker Positive White
Grey/Yellow Left Front Speaker Negative White with Black Stripe
Tan/Black Right Front Speaker Positive Grey
Tan/Yellow Right Front Speaker Negative Grey with Black Stripe

FAQs

What is a wiring harness?

A wiring harness is a device that connects your car’s original wiring to the new radio’s wiring. It makes the installation process much easier and faster.

Where can I buy a wiring harness and mounting kit?

You can buy a wiring harness and mounting kit from any car audio retailer or online store.

Do I need any special tools to install the new radio?

No, you do not need any special tools. The installation process only requires basic tools such as a screwdriver, wire crimps, and electrical tape.

Can I install the new radio myself?

Yes, you can install the new radio yourself if you have basic knowledge of car audio systems and are comfortable working with electrical wiring.

Is it necessary to disconnect the battery before installing the new radio?

Yes, it is necessary to disconnect the battery to prevent any electrical damage to your car’s electrical system and ensure your safety during the installation process.

What should I do if the new radio is not working?

If the new radio is not working, check the wiring connections to make sure they are properly connected. If everything seems okay, check the fuse to make sure it is not blown. If the problem persists, consult a professional car audio technician for assistance.