If you are looking for a wiring diagram for Ford power mirror switch, then you are in the right place. In this article, we will explain everything you need to know about the wiring diagram for Ford power mirror switch, including the components, their functions, and how to wire them. This article is written in a language that everyone can understand, so let’s get started.
Introduction
Ford power mirror switch is an essential component of the power mirror system in Ford vehicles. It is responsible for controlling the mirrors’ movement, adjusting them to the driver’s preferred angle, and folding them when necessary. The switch is located on the driver’s door panel and is connected to the power mirror motor through a wiring harness.
The power mirror switch is designed to work with the vehicle’s electrical system, and it operates on a 12-volt DC power supply. The switch is also equipped with a light-emitting diode (LED) that illuminates when the mirrors are in use, making it easy for the driver to see and adjust the mirrors at night.
Components of the Ford Power Mirror Switch
The Ford power mirror switch consists of several components that work together to control the mirror’s movement. The switch has four buttons, each with a distinct function. Let’s take a closer look at each of these components and their functions:
The Mirror Control Button
The mirror control button is located on the top-left corner of the switch and is used to control the mirrors’ movement. The button has two positions, up and down, and when pressed, it sends a signal to the mirror motor to adjust the mirrors to the driver’s preferred angle.
The Power Folding Button
The power folding button is located on the bottom-left corner of the switch and is used to fold the mirrors when necessary. The button has two positions, in and out, and when pressed, it sends a signal to the mirror motor to fold the mirrors.
The Mirror Select Button
The mirror select button is located in the middle of the switch and is used to select which mirror to adjust. The button has two positions, left and right, and when pressed, it sends a signal to the mirror motor to adjust the selected mirror.
The Power Mirror LED
The power mirror LED is located on the right side of the switch and illuminates when the mirrors are in use. The LED is connected to the switch’s power supply, and this connection is used to turn the LED on and off depending on whether the mirrors are in use or not.
Wiring Diagram for Ford Power Mirror Switch
The wiring diagram for Ford power mirror switch is straightforward, and it consists of four wires. These wires are color-coded and easy to identify. Here is a breakdown of the wires and their functions:
The Power Wire
The power wire is the red wire, and it is connected to the switch’s power supply. This wire carries the 12-volt DC power supply to the switch, which is used to power the switch and the LED.
The Ground Wire
The ground wire is the black wire, and it is connected to the switch’s ground. This wire completes the circuit and provides a ground connection for the switch and the LED.
The Mirror Motor Wire
The mirror motor wire is the green wire, and it is connected to the mirror motor. This wire carries the signal from the switch to the mirror motor, which is used to adjust the mirrors’ position.
The Power Folding Wire
The power folding wire is the yellow wire, and it is connected to the mirror motor. This wire carries the signal from the switch to the mirror motor, which is used to fold the mirrors.
FAQ
What should I do if my Ford power mirrors are not working?
If your Ford power mirrors are not working, the first thing you should do is check the power mirror switch. Make sure that it is not damaged and that it is receiving power. If the switch is working correctly, then you might have a problem with the mirror motor or the wiring harness. In this case, you should take your vehicle to a qualified mechanic for diagnosis and repair.
Can I use a power mirror switch from another vehicle in my Ford?
No, you should not use a power mirror switch from another vehicle in your Ford. The power mirror switch is designed to work with the vehicle’s electrical system and is specific to each make and model. Using a switch from another vehicle can cause electrical problems and even damage your vehicle.
How do I clean my Ford power mirror switch?
If you need to clean your Ford power mirror switch, you can use a soft brush and some electrical contact cleaner. Gently brush the switch to remove any dirt or debris, and then spray some electrical contact cleaner on the switch to clean it. Allow the cleaner to dry before using the switch again.
| Color | Wire Function |
|---|---|
| Red | Power Wire |
| Black | Ground Wire |
| Green | Mirror Motor Wire |
| Yellow | Power Folding Wire |
