Having a dash cam in your car is important for your safety and peace of mind. The Dual XCAM200 is one of the best options in the market. It is a high-quality dash cam that offers great features for a reasonable price. Installing the Dual XCAM200 requires some knowledge in car electronics, but don’t worry, this article will guide you through the process with a detailed wiring diagram and step-by-step instructions.
What You Need to Know Before Installation
Before installing the Dual XCAM200, there are a few things you need to know:
- The dash cam must be installed on the windshield, near the rearview mirror.
- The power source must be connected to the car battery.
- The dash cam must be connected to a microSD card for recording.
- You may need to use a fuse tap to avoid cutting wires.
Now that you know the basics, let’s take a closer look at the wiring diagram and the installation process.
The Dual XCAM200 Wiring Diagram
The Dual XCAM200 wiring diagram shows the connections between the dash cam, the car battery, and the microSD card. It is crucial to follow this diagram to avoid damaging your dash cam or your car’s electrical system. Here is the wiring diagram:
| Dual XCAM200 | Car Battery |
|---|---|
| +12V ACC | ACC |
| +12V BATT | Constant 12V |
| GND | Ground |
| MicroSD card | N/A |
The Dual XCAM200 has three wires that need to be connected to the car’s electrical system. The first wire is the +12V ACC, which is the accessory power source that turns on when you start the car. The second wire is the +12V BATT, which is the constant power source that keeps the dash cam running even when the car is turned off. The third wire is the GND, which is the ground wire that completes the electrical circuit.
The Installation Process
Step 1: Choose the Installation Location
The first step is to choose the best location for your dash cam on the windshield. You want to make sure it doesn’t obstruct your view while driving, and that it has a clear line of sight to the road. The best location is near the rearview mirror, as it offers a good view of the road ahead and doesn’t interfere with your driving.
Step 2: Run the Wiring
After choosing the installation location, you need to run the wires from the dash cam to the car’s electrical system. Start by running the wires along the windshield and tucking them under the headliner. Make sure the wires are hidden from view and don’t interfere with the airbags or the seatbelts.
Step 3: Connect the Wires
Connect the wires to the car’s electrical system using the wiring diagram as a guide. The +12V ACC wire should be connected to the ACC on the car’s fuse box. The +12V BATT wire should be connected to a constant 12V source, such as the battery or a fuse that is always on. The GND wire should be connected to a metal part of the car’s frame, such as a bolt or a screw.
Use a fuse tap to avoid cutting wires and to protect your car’s electrical system. The fuse tap allows you to tap into an existing fuse without affecting its function. Choose a fuse that has the same amperage rating as the one you’re tapping, and connect the fuse tap to the wire before inserting it into the fuse slot.
Step 4: Insert the MicroSD Card
The last step is to insert a microSD card into the dash cam. The Dual XCAM200 supports microSD cards up to 128GB. Make sure the card is inserted correctly and that it is formatted in FAT32 or exFAT.
FAQ
Q: Can I install the dash cam myself?
A: Yes, you can install the Dual XCAM200 yourself, but you need some knowledge in car electronics. If you’re not comfortable with car electronics, we recommend you hire a professional installer.
Q: Can I use a different microSD card?
A: Yes, you can use a different microSD card, but make sure it is compatible with the Dual XCAM200 and that it is formatted correctly.
Q: Can I use the dash cam without a microSD card?
A: No, you cannot use the Dual XCAM200 without a microSD card. The dash cam needs a microSD card to record and save the videos.
Q: Can I connect the dash cam to the car’s cigarette lighter?
A: No, you cannot connect the Dual XCAM200 to the car’s cigarette lighter. The cigarette lighter does not provide a stable power source, and it may damage the dash cam or the car’s electrical system.
Q: How do I power off the dash cam?
A: The Dual XCAM200 turns on and off with the car’s ignition. There is no need to turn it off manually. If you want to turn it off while driving, you can press and hold the power button for three seconds.
Follow these instructions carefully to install your Dual XCAM200 dash cam with ease. Enjoy the added safety and security of having a dash cam in your car.
