Bodine B100 Wiring Diagram

If you are looking for a reliable and efficient emergency lighting solution, the Bodine B100 is a great choice. This compact and durable unit provides up to 90 minutes of backup lighting in case of power outages or other emergencies. However, before you can install and use the B100, you need to understand how to wire it correctly. In this article, we will walk you through the Bodine B100 wiring diagram step by step, so you can use it with confidence.

What is the Bodine B100?

The Bodine B100 is an emergency lighting ballast that is designed to operate one or two lamps at 10-40 watts each. It can be used with both fluorescent and LED lamps, and is compatible with most types of AC ballasts. The B100 provides constant power to the lamps during normal operation, and switches to backup power in case of power loss or interruption. It has a compact size and can be installed in various locations, including ceiling or wall-mounted enclosures.

Wiring Requirements

Before you start wiring the Bodine B100, you need to make sure you have the necessary tools and equipment. Here is a list of what you will need:

Tool/Equipment Description
Screwdriver You will need a Phillips or flat-head screwdriver, depending on the screw type of your fixture or ballast.
Wire stripper You will need a wire stripper to remove the insulation from the wires.
Wire nuts You will need wire nuts to connect the wires together.
Bodine B100 You will need a Bodine B100 unit to be installed.
Emergency lighting fixture You will need an emergency lighting fixture to be powered by the Bodine B100.
AC ballast You will need an AC ballast that is compatible with the lamps you are using.

Make sure you have all of these items before proceeding with the wiring.

Wiring Instructions

Step 1: Turn off Power

The first step is to turn off the power to the fixture or ballast you will be wiring. This will prevent any electrical accidents or damage to the equipment.

Step 2: Remove Existing Wires

If there are existing wires, remove them from the fixture or ballast. Make sure you remember which wire goes where, so you can reconnect them later.

Step 3: Connect the Bodine B100

Connect the Bodine B100 as shown in the wiring diagram. There are only three wires that need to be connected: the input power, the ballast output, and the emergency output.

The input power should be connected to the AC line and neutral wires of your electrical system. The ballast output should be connected to the lamp(s) you want to power. The emergency output should be connected to the emergency lighting fixture(s).

Step 4: Connect Existing Wires

Connect the existing wires back to the fixture or ballast. Use wire nuts to secure the connections and prevent them from coming loose. Make sure you connect the wires to the correct terminals.

Step 5: Test the Wiring

After you have finished wiring the Bodine B100, turn on the power to the fixture or ballast to test if it is working properly. The B100 should provide constant power to the lamps during normal operation, and switch to backup power in case of power loss or interruption. If the unit is not working correctly, double-check your wiring and connections.

FAQ:

1. Can the Bodine B100 be used with LED lamps?

Yes, the Bodine B100 can be used with both fluorescent and LED lamps, as long as they are within the wattage range of 10-40 watts each.

2. How long does the Bodine B100 provide backup power?

The Bodine B100 provides up to 90 minutes of backup power in case of power outages or interruptions.

3. Can the Bodine B100 be used as a standalone ballast?

No, the Bodine B100 is designed to be used only as an emergency lighting ballast, and not as a standalone ballast.

4. Is the Bodine B100 suitable for outdoor use?

The Bodine B100 is not suitable for outdoor use or wet locations, and should be installed in a dry and protected area.

5. Can the Bodine B100 be installed by a non-professional?

While the wiring instructions for the Bodine B100 are relatively simple, it is recommended that the installation be done by a qualified electrician or lighting technician.

In conclusion, the Bodine B100 is an efficient and reliable emergency lighting solution that can provide up to 90 minutes of backup power during power outages or interruptions. By following the wiring instructions provided in this article, you can easily install and use the B100 with confidence. Remember to always turn off the power before starting any electrical work, and to double-check your connections before testing the unit.