Are you a Honda Civic owner trying to fix a problem with your dashboard cluster or just looking to customize it? Then you’ve come to the right place! Here, we’ll discuss the wiring diagram for your 1996-2000 Honda Civic cluster and provide you with FAQ’s to help you with your installation.
Overview of the 96-00 Civic Cluster Wiring Diagram
The Honda Civic dashboard cluster is comprised of multiple gauges and indicators that inform the driver about various aspects of their vehicle’s performance. The wiring diagram provides a visual representation of how these gauges are connected to each other and to the car’s electrical system.
There are two main types of connectors that are used in the wiring diagram:
- The rectangular dash connector
- The circular gauge cluster connector
The rectangular dash connector connects the cluster to the car’s main harness, while the circular gauge cluster connector is used to connect the individual gauges and indicators to the cluster.
Rectangular Dash Connector
The rectangular dash connector has 16 pins that are numbered 1-16. Pin 1 is located at the top left of the connector, and pin 16 is located at the bottom right. Below is a table that lists the functions of each pin:
| Pin Number | Function |
|---|---|
| 1 | Not Used |
| 2 | Not Used |
| 3 | Not Used |
| 4 | Not Used |
| 5 | Not Used |
| 6 | Not Used |
| 7 | Not Used |
| 8 | Not Used |
| 9 | Not Used |
| 10 | Instrument Cluster Illumination |
| 11 | Not Used |
| 12 | Power Source |
| 13 | Not Used |
| 14 | Not Used |
| 15 | Ground |
| 16 | Not Used |
Circular Gauge Cluster Connector
The circular gauge cluster connector has 16 pins that are numbered 1-16. Pin 1 is located at the top left of the connector, and pin 16 is located at the bottom right. Below is a table that lists the functions of each pin:
| Pin Number | Function |
|---|---|
| 1 | Not Used |
| 2 | Not Used |
| 3 | Not Used |
| 4 | Not Used |
| 5 | Not Used |
| 6 | Not Used |
| 7 | Ground |
| 8 | Coolant Temperature Gauge Signal |
| 9 | Not Used |
| 10 | Not Used |
| 11 | Not Used |
| 12 | Fuel Level Gauge Signal |
| 13 | Not Used |
| 14 | Not Used |
| 15 | Not Used |
| 16 | Speedometer Signal |
FAQ’s
1. How do I check if my cluster is working properly?
If your cluster is not responding, your first step should be to check if the fuses are working. If the fuses are fine, you can check for any broken wires in the electrical system or the cluster itself. You can also use a digital multimeter to test the cluster’s voltage and resistance values, and make sure they are within normal range.
2. How do I install a new cluster?
To install a new cluster, you first need to disconnect the battery to avoid any electrical shock. Then, you can remove the old cluster from the dashboard and disconnect all the wires attached to it. After that, you can connect the new cluster to the wires following the wiring diagram provided above. Lastly, you can turn on the power and check if the cluster is working properly.
3. How do I calibrate my fuel level gauge?
To calibrate your fuel level gauge, you need to have a known quantity of fuel in your tank. You can fill up your tank completely, and then use a voltmeter to measure the voltage signal coming from the gauge. You can then adjust the calibration resistor in the gauge to match the voltage reading with the actual fuel level in the tank.
4. How do I calibrate my speedometer?
To calibrate your speedometer, you need to find a flat, straight road with a known distance. You can then drive your car at a constant speed, and use a GPS device to measure your actual speed. You can then adjust the calibration on the speedometer to match the GPS reading with the speedometer reading.
5. Where can I find a wiring harness for my cluster?
You can find a wiring harness for your cluster at most auto parts stores, or online retailers like Amazon or eBay. You can also find them at Honda dealerships or specialty car parts stores. Make sure to check the model and year of your car before purchasing the harness to ensure compatibility.
