12 Volt SPDT Relay Wiring Diagram: Understanding the Basics

Relays are essential components used in various electrical systems, including automotive, industrial, and domestic applications. They can control high current circuits with low power signals and offer several advantages, such as safety, reliability, and versatility. One of the most common types of relays used in many applications is the 12V SPDT (Single Pole Double Throw) relay, which can switch between two separate circuits using a single electromagnetic coil. In this article, we will discuss the basics of the 12V SPDT relay wiring diagram and its various applications.

What is a 12V SPDT Relay?

A 12V SPDT relay is a type of switch that can control two circuits with one input signal. It consists of a coil, which generates a magnetic field when energized, and two sets of contacts, which open or close depending on the state of the coil. The SPDT relay has three pins: a common pin (COM), a normally closed pin (NC), and a normally open pin (NO). When the coil is not energized, the COM pin is connected to the NC pin, and the NO pin is disconnected. When the coil is energized, the COM pin is connected to the NO pin, and the NC pin is disconnected.

The 12V SPDT relay is usually powered by a 12V DC power source, such as a battery or a regulated power supply. The coil resistance of the relay determines the amount of current that is needed to energize the coil. For example, a relay with a coil resistance of 200 ohms will require 60mA of current to energize at 12V DC.

12V SPDT Relay Wiring Diagram

The 12V SPDT relay wiring diagram consists of six terminals, including the three pins mentioned earlier. The other three terminals are the Normally Open Contact (NOC), the Normally Closed Contact (NCC), and the Common Contact (CC). The wiring diagram may differ depending on the manufacturer and the application, but the basic principles are the same.

Here is an example of a 12V SPDT relay wiring diagram:

Terminal Description
1 Coil positive
2 Coil negative
3 Common contact (CC)
4 Normally Open Contact (NOC)
5 Normally Closed Contact (NCC)
6 Ground

In the wiring diagram above, the coil is connected to terminals 1 and 2, and the CC pin is connected to the power source. The NOC pin is connected to a load, such as a light or a motor, and the NCC pin is connected to ground. When the coil is not energized, the NOC pin is disconnected, and the NCC pin is connected to the load. When the coil is energized, the NOC pin is connected to the load, and the NCC pin is disconnected.

Understanding the Wiring Diagram Components

Let’s explore each component in the 12V SPDT relay wiring diagram:

Coil

The coil is the part of the relay that generates a magnetic field when energized. The coil resistance determines the amount of current that is needed to activate the relay. The positive and negative terminals of the coil are connected to terminals 1 and 2, respectively.

Common Contact (CC)

The common contact (CC) is the terminal that connects the power source to the relay. It is usually connected to the positive terminal of the power source.

Normally Open Contact (NOC)

The normally open contact (NOC) is the terminal that connects to the load when the relay is energized. It is usually connected to the positive side of the load, such as a light or a motor.

Normally Closed Contact (NCC)

The normally closed contact (NCC) is the terminal that connects to the load when the relay is not energized. It is usually connected to ground or the negative side of the power source.

Ground

The ground is the reference point of the circuit. It is usually connected to the negative terminal of the power source or the chassis of the device.

FAQs

What is a 12V SPDT relay used for?

A 12V SPDT relay is used to control two circuits with one input signal. It is commonly used in automotive applications, such as controlling headlights and auxiliary lights, as well as in industrial and domestic applications, such as controlling motors and pumps.

How do I wire a 12V SPDT relay?

To wire a 12V SPDT relay, connect the positive and negative terminals of the coil to terminals 1 and 2, respectively. Connect the common contact (CC) to the positive terminal of the power source. Connect the normally open contact (NOC) to the positive side of the load, and connect the normally closed contact (NCC) to ground or the negative side of the power source. Use a suitable wire gauge to handle the current of the load.

How do I test a 12V SPDT relay?

To test a 12V SPDT relay, apply a 12V DC voltage to the coil terminals and listen for a click sound, which indicates that the contacts have switched. Use a multimeter to measure the continuity between the NOC and CC terminals when the coil is energized and between the NCC and CC terminals when the coil is not energized.

What are the advantages of using a 12V SPDT relay?

The advantages of using a 12V SPDT relay include:

  • Allows an input signal to control two separate circuits
  • Offers high reliability and durability
  • Provides electrical isolation between the input and output circuits
  • Requires low power to control high current circuits

Conclusion

The 12V SPDT relay wiring diagram is a fundamental concept that is used in many electrical systems. Understanding the basics of the wiring diagram is essential for anyone who works with relays or wants to troubleshoot a relay-related problem. By using the information provided in this article, you can wire a 12V SPDT relay with confidence and ensure that it functions correctly in your application.