AFI Marine wiper motors are the industry standard for marine windshield wiper systems. They are known for their durability, reliability, and ease of installation. However, when it comes to wiring these motors, things can get a little tricky. In this article, we will provide a step-by-step guide on how to wire an AFI Marine wiper motor, along with some frequently asked questions and helpful tips.
What You Will Need
Before we begin, let’s go over what you will need to wire your AFI Marine wiper motor:
- AFI Marine wiper motor
- Wiring harness
- Fuse holder and fuse
- Switch
- Wire strippers
- Wire connectors
- Screwdriver
Once you have gathered these items, you can begin wiring your AFI Marine wiper motor.
Step-by-Step Guide
Follow these steps to wire your AFI Marine wiper motor:
Step 1: Mount the Motor
The first step is to mount the motor to your boat’s windshield. Make sure it is secure and in a position that allows the wiper arm to reach the entire windshield.
Step 2: Connect the Wiring Harness
Connect the wiring harness to the motor. The harness should have two wires: a black wire and a red wire. The black wire is the ground wire, and the red wire is the power wire.
Step 3: Install a Fuse
Next, install a fuse holder and fuse in the power wire. This will protect the motor from electrical damage in case of a short circuit.
Step 4: Wire the Switch
Wire the switch according to the manufacturer’s instructions. The switch should have at least two terminals: one for the power wire and one for the ground wire.
Step 5: Connect the Wiper Arm
Finally, connect the wiper arm to the motor. Follow the manufacturer’s instructions for installing the wiper arm and adjusting its position.
Helpful Tips
Here are some helpful tips to keep in mind when wiring your AFI Marine wiper motor:
- Always follow the manufacturer’s instructions.
- Use the correct gauge of wire for your installation.
- Make sure your wiring is neat and organized to avoid future problems.
- Test your system before putting everything back together.
FAQ
Here are some frequently asked questions about wiring AFI Marine wiper motors:
How do I know if my wiper motor is receiving power?
You can use a multimeter to test for voltage at the power wire. If you don’t have a multimeter, you can also check for voltage using a test light.
Why is my wiper motor not working?
There could be several reasons why your wiper motor is not working. Check to make sure the motor is receiving power, the fuse is not blown, and the wiring connections are secure. If everything checks out, the motor itself may be faulty and will need to be replaced.
How do I adjust the speed of my wiper motor?
Most AFI Marine wiper motors have a built-in speed controller that allows you to adjust the speed of the wiper arm. Refer to the manufacturer’s instructions for adjusting the speed.
Conclusion
Wiring an AFI Marine wiper motor is not difficult, but it does require some knowledge of electrical systems. Follow the steps outlined in this article and refer to the manufacturer’s instructions for best results. With proper installation and maintenance, your AFI Marine wiper motor will provide reliable performance for years to come.
