If you’re looking to replace the radio in your 2004 Mitsubishi Endeavor, you’ll need to know the wiring diagram. Without the wiring diagram, it can be a challenge to install the new radio properly. In this article, we’ll provide you with a comprehensive guide on the 2004 Mitsubishi Endeavor radio wiring diagram.
Overview of the 2004 Mitsubishi Endeavor Radio Wiring Diagram
The 2004 Mitsubishi Endeavor radio wiring diagram provides the color codes for the different wires in your vehicle’s radio system. The radio system includes the radio, amplifier, and speakers. The wiring diagram includes information on the color of the wires for each component, as well as which wire connects to which component.
One thing to keep in mind is that the wiring diagram may vary slightly depending on the specific model of your Mitsubishi Endeavor. However, the basic wiring layout should be similar across models.
Radio Wiring Color Codes
Here’s a breakdown of the color codes for the different wires in the 2004 Mitsubishi Endeavor radio system:
| Wire Color | Function |
|---|---|
| Blue/Red | Power Antenna |
| Red/Black | Battery (+) |
| Yellow/Black | Ignition Switch (ACC) |
| Yellow/Red | Ignition Switch (ON) |
| Orange | Illumination |
| Black | Ground |
| Gray | Right Front Speaker (+) |
| Gray/Black | Right Front Speaker (-) |
| White | Left Front Speaker (+) |
| White/Black | Left Front Speaker (-) |
| Green | Left Rear Speaker (+) |
| Green/Black | Left Rear Speaker (-) |
| Purple | Right Rear Speaker (+) |
| Purple/Black | Right Rear Speaker (-) |
FAQ
Q: Can I install a different radio in my 2004 Mitsubishi Endeavor?
A: Yes, you can install a different radio in your Endeavor. However, you’ll need to know the wiring diagram for your vehicle to properly install the new radio.
Q: What if the wiring diagram doesn’t match my vehicle?
A: If the wiring diagram doesn’t match your vehicle, it’s possible that your vehicle has a different wiring configuration. You may need to consult a professional to properly install the new radio.
Q: Can I use the existing wiring harness for the new radio?
A: Yes, you can use the existing wiring harness for the new radio. However, you’ll need to make sure that the wiring harness matches the wiring diagram for your vehicle.
Q: What tools will I need to install a new radio?
A: You’ll need a few tools to install a new radio, including a screwdriver, wire cutters, wire strippers, and crimping pliers. You may also need a trim removal tool to remove the dashboard trim to access the radio.
Conclusion
The 2004 Mitsubishi Endeavor radio wiring diagram is essential if you’re looking to install a new radio in your Endeavor. With this guide, you’ll be able to properly install the new radio and enjoy your favorite tunes while driving. If you have any questions or concerns, be sure to consult a professional for assistance.
