A toggle switch is an electrical switch that is used to turn a circuit on or off. This switch has a lever that is moved up or down to activate or deactivate the circuit. A 2 pole toggle switch has two separate circuits that can be turned on or off by the same lever. This article will explain the wiring diagram for a 2 pole toggle switch in relaxed English language.
Understanding the Terminology
Before we dive into the wiring diagram, let’s understand some of the basic terminologies used in this article.
| Term | Description |
|---|---|
| Pole | Number of circuits that can be controlled by the switch |
| Throw | Number of positions the switch can be in (on or off) |
| Common | The connection point that is shared between the circuits |
Wiring Diagram for 2 Pole Toggle Switch
The wiring diagram for a 2 pole toggle switch is quite simple. This switch has six terminals: two for each circuit (pole) and two for the common connection point. The terminals are named as follows:
- Pole 1 Terminal A (P1A)
- Pole 1 Terminal B (P1B)
- Pole 2 Terminal A (P2A)
- Pole 2 Terminal B (P2B)
- Common Terminal 1 (C1)
- Common Terminal 2 (C2)
Now let’s take a look at the wiring diagram.
As you can see, both circuits (pole 1 and pole 2) are connected to their respective load. The common connection point is shared between the two circuits and is connected to the power source. When the switch is in the up position, circuit 1 is turned on and circuit 2 is turned off. When the switch is in the down position, circuit 2 is turned on and circuit 1 is turned off.
FAQs
Q: Can a 2 pole toggle switch be used as a 1 pole switch?
A: Yes, a 2 pole toggle switch can be used as a 1 pole switch. You just need to ignore one of the poles and connect the load to the other pole and the common connection point.
Q: What is the maximum voltage and current rating for a 2 pole toggle switch?
A: The maximum voltage and current rating for a 2 pole toggle switch depends on the model and manufacturer. It is recommended to check the datasheet or consult the manufacturer to ensure that the switch can handle the required voltage and current.
Q: Can a 2 pole toggle switch be used for DC circuits?
A: Yes, a 2 pole toggle switch can be used for both AC and DC circuits. However, it is important to ensure that the switch is rated for the voltage and current of the DC circuit.
Q: How do you wire a 2 pole toggle switch with a pilot light?
A: Wiring a 2 pole toggle switch with a pilot light is slightly different than wiring a regular toggle switch. The pilot light requires a separate connection to the power source. The wiring diagram for a 2 pole toggle switch with a pilot light is shown below:
In this wiring diagram, the red wire is the connection for the pilot light. When the switch is turned on, the pilot light is also turned on.
Q: What is the difference between a 2 pole and 3 pole toggle switch?
A: A 2 pole toggle switch has two separate circuits that can be turned on or off by the same lever. A 3 pole toggle switch has three separate circuits that can be turned on or off by the same lever.
Q: Can a 2 pole toggle switch be used for motor control?
A: Yes, a 2 pole toggle switch can be used for motor control. However, it is important to ensure that the switch is rated for the voltage and current of the motor circuit and that the switch is properly wired to control the motor.
Conclusion
A 2 pole toggle switch is a simple yet useful switch that can control two separate circuits with the same lever. The wiring diagram for a 2 pole toggle switch is also quite simple and easy to understand. It is important to ensure that the switch is properly rated and wired for the circuit it will be used in. We hope that this article has helped you understand the wiring diagram for a 2 pole toggle switch.
