If you are looking for a wiring diagram for your 1999 Dodge Durango stereo, you have come to the right place. In this article, we will provide you with all the information you need to install a new stereo in your 1999 Dodge Durango. We have included a wiring diagram, tables, FAQs, and other helpful information to make the process as easy as possible.
Wiring Diagram
Before you begin installing your new stereo, you will need a wiring diagram to guide you through the process. Here is a wiring diagram for a 1999 Dodge Durango:
| Wire Color | Function |
|---|---|
| Red | Battery |
| Yellow | Accessory |
| Black | Ground |
| Blue | Power Antenna |
| Orange | Illumination |
| Green | Left Front Speaker Positive |
| Green with Black Stripe | Left Front Speaker Negative |
| Violet | Right Front Speaker Positive |
| Violet with Black Stripe | Right Front Speaker Negative |
| Gray | Left Rear Speaker Positive |
| Gray with Black Stripe | Left Rear Speaker Negative |
| Dark Green | Right Rear Speaker Positive |
| Dark Green with Black Stripe | Right Rear Speaker Negative |
Make sure to double-check that your wiring matches this diagram before proceeding with your installation.
FAQs
What size is the stereo in a 1999 Dodge Durango?
The size of the stereo in a 1999 Dodge Durango is a double DIN, which means it measures 7 inches by 4 inches.
Can I install an aftermarket stereo in my 1999 Dodge Durango?
Yes, you can install an aftermarket stereo in your 1999 Dodge Durango. However, you will need a wiring harness and a mounting kit to make the installation process smoother.
What tools do I need to install a new stereo in my 1999 Dodge Durango?
You will need a few basic tools to install a new stereo in your 1999 Dodge Durango, including a screwdriver, pliers, wire cutters, and a wire stripper.
How do I remove the factory stereo from my 1999 Dodge Durango?
To remove the factory stereo from your 1999 Dodge Durango, you will need to use a set of DIN removal tools. Insert the tools into the slots on either side of the stereo and gently pull the stereo out of the dash.
How do I connect the wiring harness to my new stereo?
Connecting the wiring harness to your new stereo is a simple process. Match the colors of the wires on the harness to the corresponding wires on the stereo and twist them together. Then, use electrical tape or wire connectors to secure the connections.
Conclusion
Installing a new stereo in your 1999 Dodge Durango may seem daunting, but with the right resources and a little bit of know-how, it can be a straightforward process. Use this wiring diagram, the FAQs, and our other helpful information to guide you through the installation process and enjoy your new stereo.
