When it comes to changing or upgrading the stereo system in your 1998 Subaru Legacy, it is important to have a clear understanding of the wiring diagram. This journal article will give you all the information you need to properly wire your new stereo in your Subaru Legacy. We will cover everything from the wiring colors and functions to frequently asked questions about this topic.
Wiring Colors and Functions
The wiring harness for the 1998 Subaru Legacy has a standard color code that makes it easy to read and understand. Here is a breakdown of each wire’s color and function:
| Wire Color | Function |
|---|---|
| Yellow | Battery |
| Black/White | Ground |
| Red | Ignition |
| Blue/White | Amp Turn-On |
| Green | Left Front Speaker Positive |
| Green/Black | Left Front Speaker Negative |
| Purple | Right Front Speaker Positive |
| Purple/Black | Right Front Speaker Negative |
| White | Left Rear Speaker Positive |
| White/Black | Left Rear Speaker Negative |
| Gray | Right Rear Speaker Positive |
| Gray/Black | Right Rear Speaker Negative |
It is important to note that the factory radio in the 1998 Subaru Legacy does not have an amp turn-on wire. If your new stereo requires this wire, use the blue/white wire from the wiring harness.
You may also notice that the factory radio has two black/white wires. One of these wires is for the ground, and the other is for the illumination. To connect the illumination wire to your new stereo, splice it into the orange wire from the wiring harness.
FAQ
Q: Do I need any special tools to install a new stereo in my 1998 Subaru Legacy?
A: To properly install a new stereo in your Subaru Legacy, you will need a wire stripper, crimping tool, and electrical tape. These tools will allow you to properly connect the wiring harness to your new stereo.
Q: Can I replace the factory speakers in my 1998 Subaru Legacy with aftermarket speakers?
A: Yes, you can replace the factory speakers in your Subaru Legacy with aftermarket speakers. Keep in mind that you may need to modify the speaker brackets to fit the aftermarket speakers properly.
Q: Will installing a new stereo void my 1998 Subaru Legacy’s warranty?
A: In most cases, installing a new stereo will not void your Subaru Legacy’s warranty. However, if the installation of the new stereo causes damage to the electrical system, that damage may not be covered by the warranty.
Q: Can I install a subwoofer in my 1998 Subaru Legacy?
A: Yes, you can install a subwoofer in your Subaru Legacy. You will need a separate amplifier to power the subwoofer, and you may need to install a crossover to properly integrate the subwoofer with the rest of the sound system.
Q: How do I remove the factory stereo from my 1998 Subaru Legacy?
A: To remove the factory stereo from your Subaru Legacy, you will need to use a panel tool to remove the trim around the stereo. Once the trim is removed, you will have access to the mounting screws that hold the stereo in place. Remove the screws, and the stereo will come out easily.
In conclusion, knowing the wiring diagram for your 1998 Subaru Legacy’s stereo system is important when installing a new stereo or making changes to the existing system. With this information, you will be able to properly wire your new stereo and enjoy a high-quality sound system in your car.
