A push pull switch is a type of switch that is used to control electrical circuits. It is called a push pull switch because it requires the user to push and pull the switch to turn it on and off. This type of switch is commonly used in cars, boats, and other vehicles to control various electrical functions.
How to Wire a 12 Volt Push Pull Switch
Wiring a 12 volt push pull switch is a relatively simple process. The following diagram shows how to wire a 12 volt push pull switch:
| Wire Color | Description |
|---|---|
| Red | Connects to the power source (positive terminal of the battery) |
| Black | Connects to the load (the electrical device being controlled by the switch) |
| Green | Connects to the ground (negative terminal of the battery) |
To wire the switch, follow these steps:
Step 1: Gather Materials
You will need the following materials:
- A 12 volt push pull switch
- Red wire
- Black wire
- Green wire
- Crimping tool
- Wire strippers
Step 2: Strip the Wires
Using a wire stripper, strip about 1/4 inch of insulation from each end of the red, black, and green wires.
Step 3: Connect the Wires
Using a crimping tool, connect the red wire to the switch’s positive terminal, the black wire to the switch’s load terminal, and the green wire to the switch’s ground terminal. Make sure the connections are secure.
Step 4: Test the Switch
After wiring the switch, test it by connecting the load (the electrical device being controlled by the switch) and turning the switch on and off. If the device turns on and off as expected, the wiring is complete.
Step 5: Secure the Wiring
Once the wiring is complete and tested, use zip ties or electrical tape to secure the wires in place to prevent them from becoming loose or tangled.
FAQ
What is a 12 volt push pull switch?
A 12 volt push pull switch is a type of switch that is used to control electrical circuits. It is called a push pull switch because it requires the user to push and pull the switch to turn it on and off.
What is the purpose of a push pull switch?
The purpose of a push pull switch is to control electrical circuits. It is commonly used in cars, boats, and other vehicles to control various electrical functions.
How do I wire a 12 volt push pull switch?
To wire a 12 volt push pull switch, strip about 1/4 inch of insulation from each end of the red, black, and green wires. Connect the red wire to the switch’s positive terminal, the black wire to the switch’s load terminal, and the green wire to the switch’s ground terminal. Test the switch by connecting the load and turning the switch on and off. Secure the wiring with zip ties or electrical tape.
What materials do I need to wire a 12 volt push pull switch?
You will need a 12 volt push pull switch, red wire, black wire, green wire, a crimping tool, and wire strippers.
Where can I buy a 12 volt push pull switch?
You can buy a 12 volt push pull switch at most automotive or marine supply stores, as well as online retailers such as Amazon or eBay.
