The Pontiac G6 is a mid-size car that was produced by General Motors from 2004 to 2010. The G6 was available in both sedan and coupe body styles and came equipped with a variety of features including power windows, power locks, and windshield wipers. This article will focus on the windshield wiper wiring diagrams for the Pontiac G6.
What are windshield wipers?
Windshield wipers are a critical component of a vehicle’s safety system. They are used to clear rain, snow, and other debris from the windshield in order to improve visibility while driving. Without properly functioning windshield wipers, a driver’s ability to see the road ahead can be severely compromised, putting both the driver and passengers at risk.
How do windshield wipers work?
Windshield wipers are powered by an electric motor that is controlled by a switch on the driver’s side of the vehicle. When the switch is activated, a series of gears and linkages engage to move the wiper arms back and forth across the windshield. The wipers are designed to clear the windshield in a specific pattern, which is determined by the position of the motor and the length of the wiper arms.
What are common problems with windshield wipers?
There are a number of problems that can occur with windshield wipers. Some of the most common issues include:
| Problem | Cause | Solution |
|---|---|---|
| Wipers not moving | Blown fuse or faulty motor | Replace fuse or motor |
| Wipers not clearing windshield | Worn or damaged wiper blades | Replace wiper blades |
| Wipers moving in the wrong direction | Incorrectly installed wiper blades | Reinstall wiper blades |
Pontiac G6 Windshield Wiper Wiring Diagrams
Front Windshield Wiper Wiring Diagram
The front windshield wiper wiring diagram for the Pontiac G6 is shown below:
As you can see from the diagram, the front windshield wiper motor is powered by a 30-amp fuse and controlled by a combination switch on the steering column. The switch sends a signal to the wiper motor control module, which then activates the motor to move the wiper arms.
Front Windshield Wiper Wiring Diagram Troubleshooting
If you are experiencing problems with your front windshield wipers, you can use the following troubleshooting steps:
- Check the fuse to ensure it is not blown.
- Check the wiring connections to ensure they are secure.
- Test the switch to ensure it is sending a signal to the motor control module.
- If the switch is working properly, test the motor to ensure it is receiving power and functioning correctly.
Rear Windshield Wiper Wiring Diagram
The rear windshield wiper wiring diagram for the Pontiac G6 is shown below:
As you can see from the diagram, the rear windshield wiper motor is controlled by a separate switch on the dashboard. The switch sends a signal to the wiper motor control module, which then activates the motor to move the wiper arm.
Rear Windshield Wiper Wiring Diagram Troubleshooting
If you are experiencing problems with your rear windshield wiper, you can use the following troubleshooting steps:
- Check the fuse to ensure it is not blown.
- Check the wiring connections to ensure they are secure.
- Test the switch to ensure it is sending a signal to the motor control module.
- If the switch is working properly, test the motor to ensure it is receiving power and functioning correctly.
Conclusion
Properly functioning windshield wipers are critical for safe driving. If you are experiencing problems with your Pontiac G6 windshield wipers, these wiring diagrams and troubleshooting steps should help you diagnose and repair the issue.
