Alarm Controls is a leading manufacturer of access and egress solutions that are widely used in commercial and industrial buildings. One of the best-selling products of the company is the TS-9 keypad, which is known for its reliability and ease of use. In this article, we will discuss the wiring diagram of the TS-9 keypad and provide you with some useful tips on how to install it.
Overview
The TS-9 keypad is designed to be mounted on the wall near the door it controls. It has a 3×4 matrix of keys that can be used to enter codes for unlocking the door. The keypad is wired to a control panel, which is usually located near the door or in a security room. The control panel is responsible for processing the codes entered by the user and sending signals to the door lock or release mechanism.
Wiring Diagram
| Wire Color | Description |
|---|---|
| Red | +12VDC Power Input |
| Black | Ground |
| Green | Data Out |
| White | Data In |
| Yellow | LED Negative |
The TS-9 keypad has five wires that need to be connected to the control panel. The red wire is the power input, which should be connected to a +12VDC power source. The black wire is the ground, which should be connected to the ground terminal of the control panel. The green and white wires are the data lines, which should be connected to the data in and data out terminals of the control panel. Finally, the yellow wire is the LED negative, which should be connected to the negative terminal of the LED that lights up when a key is pressed.
Installation
The TS-9 keypad is designed to be installed on any flat surface using the mounting screws provided with the unit. Before installing the keypad, make sure that you have all the necessary tools and materials, including a screwdriver, drill, and mounting screws.
Step-by-Step Guide
Follow these steps to install the TS-9 keypad:
- Choose a suitable location for the keypad near the door it controls.
- Mark the location of the mounting holes on the wall using a pencil.
- Drill holes at the marked locations using a drill.
- Insert the mounting screws through the holes in the keypad and screw them into the wall using a screwdriver.
- Connect the red, black, green, white, and yellow wires of the keypad to the corresponding terminals on the control panel.
- Test the keypad by entering a code and checking if the door unlocks or releases.
Note: Make sure that the wires are connected securely and that there are no loose connections. Loose connections can cause the keypad to malfunction or stop working altogether.
FAQs
Q1: Can the TS-9 keypad be used with any control panel?
A1: The TS-9 keypad is designed to be compatible with most control panels that support data input and output. However, it is always best to check the specifications of the control panel before installing the keypad.
Q2: What is the maximum distance between the TS-9 keypad and the control panel?
A2: The maximum distance between the TS-9 keypad and the control panel depends on the quality of the wiring and the signal strength of the data lines. In general, it is recommended to keep the distance below 500 feet to ensure reliable operation.
Q3: How many codes can the TS-9 keypad store?
A3: The TS-9 keypad can store up to 99 codes, each of which can be 4 to 8 digits long. The codes can be programmed using the programming mode of the control panel.
Q4: What is the warranty period of the TS-9 keypad?
A4: The TS-9 keypad comes with a one-year limited warranty from the date of purchase. The warranty covers defects in materials and workmanship and does not cover damage caused by misuse, abuse, or normal wear and tear.
Q5: How can I troubleshoot a problem with the TS-9 keypad?
A5: If you experience any problems with the TS-9 keypad, such as non-responsive keys or error messages on the control panel, you should first check the wiring connections to ensure that they are secure and correctly installed. You should also check the programming settings of the control panel to ensure that they are set correctly. If the problem persists, you should contact the technical support team of Alarm Controls for further assistance.
