If you’re looking for a reliable and efficient way to wire the 855e BPM10, you’re in the right place. This article explains the step-by-step procedure of wiring the 855e BPM10 and provides you with valuable information and tips to simplify your installation process. The 855e BPM10 is a powerful and versatile device used by many industrial control systems. It’s designed to help you sense the presence and absence of a wide range of objects and products, making it an essential part of any automation system.
Getting started with the 855e BPM10
Before we dive into the details of wiring the 855e BPM10, let’s take a moment to understand the device and its components. The 855e BPM10 is a photoelectric sensor with a 10m sensing range. It’s composed of two main parts: the sensor body and the connector. The sensor body houses the emitter and receiver that detect the presence or absence of an object, while the connector serves as the interface between the sensor and the controller.
When it comes to wiring the 855e BPM10, you’ll need a few tools and materials. These include a power source, a controller, a cable gland, and wires. Ensure that you have all the necessary tools and materials before you start wiring.
Step 1: Mount the Sensor
The first step in wiring the 855e BPM10 is to mount the sensor. The sensor body has a mounting hole on the back that allows you to attach it to a surface. You can also use a mounting bracket or a sensor tube to mount the sensor. Ensure that the sensor is securely attached to a stable surface and that the emitter and receiver are directed towards the sensing area.
Step 2: Install the Cable Gland
After mounting the sensor, you’ll need to install the cable gland. The cable gland protects the cable from damage and prevents dust and moisture from entering the sensor. To install the cable gland, drill a hole on the surface near the sensor and insert the gland into the hole. Pass the cable through the gland and tighten the gland nuts to secure the cable.
Step 3: Connect the Wires
Now that you have installed the cable gland, it’s time to connect the wires. The 855e BPM10 has three wires that need to be connected: power, ground, and signal. The power wire (typically red) supplies power to the sensor, while the ground wire (typically black) provides a reference voltage. The signal wire (typically white or yellow) transmits the sensing output to the controller.
Connect the power wire to the power source, the ground wire to the ground, and the signal wire to the controller. Ensure that you connect the wires correctly to avoid damaging the sensor or controller. Refer to the wiring diagram that came with the sensor or consult with a professional if you’re unsure about the wiring.
FAQs
| Question | Answer |
|---|---|
| What is the sensing range of the 855e BPM10? | The 855e BPM10 has a sensing range of 10 meters. |
| What type of sensor is the 855e BPM10? | The 855e BPM10 is a photoelectric sensor. |
| What are the main components of the 855e BPM10? | The 855e BPM10 is composed of the sensor body and the connector. |
| What tools do I need to wire the 855e BPM10? | You’ll need a power source, a controller, a cable gland, and wires. |
| How do I mount the 855e BPM10? | You can mount the 855e BPM10 using a mounting hole on the back or a mounting bracket or a sensor tube. |
Conclusion
Wiring the 855e BPM10 can seem daunting at first, but with the right tools and information, it can be a straightforward process. Remember to follow the steps outlined in this article and refer to the wiring diagram provided with the sensor. If you’re unsure about anything, don’t hesitate to seek advice from a professional. With the 855e BPM10 wired correctly, you’ll have a powerful and reliable sensor that can help you automate your industrial processes.
