As an RV owner, one of the most important things you need to know is how to wire your 6 pin RV plug. A correctly wired plug can make all the difference in the world when it comes to the functionality of your RV. That is why in this article, we will go through the process of wiring your 6 pin RV plug step-by-step. We will also include some helpful tips, tricks, and some commonly asked questions to help you get started.
What is a 6 Pin RV Plug?
A 6 pin RV plug is a standard wiring configuration that is used to connect a travel trailer or camper to the towing vehicle. It connects the trailer’s tail lights, brake lights, and turn signals to the towing vehicle’s electrical system.
What are the 6 Pins on an RV Plug?
The 6 pins on an RV plug are:
| Pin | Color | Function |
|---|---|---|
| 1 | White | Ground |
| 2 | Blue | Brake Controller Output |
| 3 | Green | Right Turn/Brake |
| 4 | Brown | Running Lights |
| 5 | Yellow | Left Turn/Brake |
| 6 | Red | 12V Charge |
How to Wire a 6 Pin RV Plug?
Here is a step-by-step guide on how to wire a 6 pin RV plug:
Step 1: Cut the Wires to Length
Cut the wires to the desired length, allowing extra length for curves and loops, if necessary. Strip the ends of the wires about ¼ inch for connection to the plug.
Step 2: Connect the Ground Wire
Connect the white ground wire to the center pin of the plug. Make sure the wire is securely fastened and that there is no exposed wire.
Step 3: Connect the Brake Controller Output Wire
Connect the blue brake controller output wire to the second pin of the plug. This wire is typically only used if your towing vehicle has a brake controller installed.
Step 4: Connect the Right Turn/Brake Wire
Connect the green right turn/brake wire to the third pin of the plug. This wire connects to the towing vehicle’s right turn signal and brake light.
Step 5: Connect the Running Lights Wire
Connect the brown running lights wire to the fourth pin of the plug. This wire connects to the towing vehicle’s running lights.
Step 6: Connect the Left Turn/Brake Wire
Connect the yellow left turn/brake wire to the fifth pin of the plug. This wire connects to the towing vehicle’s left turn signal and brake light.
Step 7: Connect the 12V Charge Wire
Connect the red 12V charge wire to the sixth pin of the plug. This wire charges the battery in the travel trailer or camper while driving.
Tips and Tricks
Here are a few tips and tricks to help you wire your 6 pin RV plug:
Tip 1: Use Color-Coded Wires
Using color-coded wires can make it easier to identify which wire goes where. This can save you a lot of time and frustration.
Tip 2: Use Heat Shrink Tubing
Heat shrink tubing can help protect your connections from moisture and corrosion. It can also make your connections more secure.
Tip 3: Test Your Connections
Before hitting the road, make sure to test your connections to ensure that everything is working properly. This can prevent any issues while on the road.
FAQs
What if My RV has a Different Wiring Configuration?
If your RV has a different wiring configuration, you may need to purchase an adapter. These are readily available at most RV supply stores.
Can I Wire My RV Plug without a Brake Controller?
Yes, you can wire your RV plug without a brake controller, but you will not have the ability to control the trailer’s brakes through the towing vehicle’s braking system.
Can I Wire My 6 Pin RV Plug Myself?
Yes, you can wire your 6 pin RV plug yourself, but it is important to follow the correct wiring configuration and to ensure that all connections are secure.
What if I Am Not Comfortable Wiring My RV Plug Myself?
If you are not comfortable wiring your RV plug yourself, it is best to consult a professional RV technician. They will have the expertise and experience to get the job done right.
In conclusion, wiring your 6 pin RV plug is an essential part of owning an RV. By following the steps outlined in this article, you can ensure that your RV is wired correctly and that your travels are safe and enjoyable.
