When it comes to wiring a 5 pin lighted rocker switch, there are a few key things to keep in mind. In this article, we’ll cover everything you need to know about the wiring process, including diagrams, tables, and frequently asked questions.
What is a 5 Pin Lighted Rocker Switch?
A 5 pin lighted rocker switch is a type of switch that has five electrical contacts, or pins, and a small LED light built into the switch. The switch is commonly used in automotive, marine, and other applications where a lighted switch is desired. The LED light allows the user to easily see when the switch is turned on or off.
The switch has a rectangular shape that is designed to fit into a standard switch panel. It is typically rated for 12 volts DC and can handle up to 20 amps of current.
Wiring a 5 Pin Lighted Rocker Switch
The wiring process for a 5 pin lighted rocker switch is relatively simple. Here’s the step-by-step process:
- Start by identifying the pins on the switch. The pins are typically labeled with numbers or symbols that correspond to the wiring diagram.
- Determine the power source for the switch. This can be a battery, power supply, or other source of 12 volts DC power.
- Connect the positive (+) wire from the power source to pin 2 on the switch.
- Connect the negative (-) wire from the power source to pin 7 on the switch.
- Connect the accessory or load that the switch will control to pin 3 on the switch.
- Connect the other side of the accessory or load to pin 6 on the switch.
- Connect the LED light on the switch to pin 1 (positive) and pin 5 (negative) on the switch.
- If necessary, connect pin 4 on the switch to ground to complete the circuit.
Here is a wiring diagram that shows the connections for a 5 pin lighted rocker switch:
| Pin 1 | LED Positive | Connect to Positive (+) Wire |
| Pin 2 | Power | Connect to Positive (+) Wire |
| Pin 3 | Accessory | Connect to Accessory or Load |
| Pin 4 | Ground | Connect to Ground if Necessary |
| Pin 5 | LED Negative | Connect to Negative (-) Wire |
| Pin 6 | Load | Connect to Accessory or Load |
| Pin 7 | Power Negative | Connect to Negative (-) Wire |
FAQs
What types of loads can a 5 pin lighted rocker switch control?
A 5 pin lighted rocker switch can be used to control a wide range of loads, including lights, fans, heaters, and other accessories. The switch should be rated for the same voltage and current as the load it will control.
What is the maximum current rating for a 5 pin lighted rocker switch?
A 5 pin lighted rocker switch is typically rated for up to 20 amps of current. If you need to control a load that requires more than 20 amps, you should use a relay or another type of switch that is rated for higher current.
What is the purpose of the LED light on a 5 pin lighted rocker switch?
The LED light on a 5 pin lighted rocker switch serves two purposes. First, it allows the user to easily see when the switch is turned on or off. Second, it can be used to indicate the status of the accessory or load that the switch controls. For example, a switch that controls a light might have a green LED that turns on when the light is on.
Can a 5 pin lighted rocker switch be used in a marine environment?
Yes, a 5 pin lighted rocker switch can be used in a marine environment as long as it is properly sealed and rated for marine use. The switch should be made from corrosion-resistant materials and should be rated for the appropriate voltage and current.
How do I install a 5 pin lighted rocker switch in a switch panel?
Installing a 5 pin lighted rocker switch in a switch panel is relatively simple. First, drill a hole in the switch panel that is the same size as the switch. Then, insert the switch into the hole and secure it using the mounting nut provided. Finally, connect the wires according to the wiring diagram.
Overall, wiring a 5 pin lighted rocker switch is a straightforward process that can be accomplished with a few basic tools and some knowledge of electrical wiring. By following the steps outlined in this article and using the wiring diagram and FAQ section as a reference, you should be able to successfully wire a 5 pin lighted rocker switch for your particular application.
