The 2019 Ford Raptor is an off-road beast that’s designed to handle any terrain. One of the key features that make it such a capable vehicle are the upfitter switches. These switches allow you to control various aftermarket accessories, such as off-road lights, winches, and air compressors, directly from the dashboard. In this article, we’ll take a closer look at the wiring diagram for these switches, how to install them, and some frequently asked questions about them.
Wiring Diagram
The wiring diagram for the 2019 Ford Raptor upfitter switches consists of four switches, each of which has a 30-amp fuse and two terminals. The switches are labeled as follows:
| Switch Label | Function |
|---|---|
| SW1 | 10A fused power |
| SW2 | 10A fused power |
| SW3 | 10A fused power |
| SW4 | 10A fused power |
These switches are designed to work with aftermarket accessories that require up to 30 amps of power. When installing these accessories, it’s important to follow the manufacturer’s instructions and use the appropriate gauge wire to ensure proper power delivery.
Installation
The installation of the upfitter switches on the 2019 Ford Raptor is a fairly simple process. Here’s a step-by-step guide:
- Remove the dash panel on the left side of the steering wheel to access the upfitter switch wire harness.
- Connect the wire harness to the upfitter switch wire harness.
- Route the accessory wire through the firewall and connect it to the appropriate accessory.
- Connect the ground wire to a suitable ground point on the vehicle.
- Test the accessory to ensure that it’s working properly.
It’s important to note that any accessories that require more than 30 amps of power should be connected directly to the battery or through a relay.
FAQ
Here are some frequently asked questions about the 2019 Ford Raptor upfitter switches:
What accessories can be connected to the upfitter switches?
The upfitter switches are designed to work with a variety of aftermarket accessories, including off-road lights, winches, air compressors, and more. It’s important to ensure that the accessories you’re connecting to the switches don’t exceed the maximum amperage rating.
Can I use the upfitter switches to control factory-installed accessories?
No, the upfitter switches are only designed to work with aftermarket accessories. If you want to control factory-installed accessories, you’ll need to use the factory-installed switches.
Do I need to install a relay for each accessory?
No, you only need to install a relay if the accessory requires more than 30 amps of power. If the accessory requires less than 30 amps, you can connect it directly to the upfitter switch wire harness.
Is it difficult to install the upfitter switches?
No, the installation process is fairly simple and can be done with basic tools. However, if you’re not comfortable working with wiring or electrical components, it’s recommended that you seek the assistance of a professional mechanic.
Can I install the upfitter switches on any Ford vehicle?
No, the upfitter switches are specifically designed for the 2019 Ford Raptor. However, other Ford vehicles may have similar upfitter switch options. Consult your vehicle’s owner’s manual for more information.
In conclusion, the 2019 Ford Raptor upfitter switches are a powerful tool for anyone looking to customize their off-road vehicle. By following the wiring diagram and installation instructions, you can easily add a wide range of aftermarket accessories to your vehicle’s dashboard. Just be sure to follow safety guidelines and use the appropriate gauge wire to ensure proper power delivery.
