If you own a 2019 Ford Raptor, you may be interested in learning about the aux switch wiring diagram. These switches allow you to add additional lighting or other accessories to your vehicle, and knowing how to properly wire them is important for safety and functionality.
Understanding the Aux Switches
The 2019 Ford Raptor comes with up to six auxiliary switches that you can use to control various accessories, such as lights, air compressors, or winches. These switches are pre-wired and ready to use, and they are located on the dash below the climate controls.
Each switch has its own circuit and is rated for 25 amps. The circuit is protected by a 10-amp fuse in the engine compartment fuse box, which is labeled “Aux Pwr.”
Before you start wiring any accessories to these switches, it’s important to understand what they do and how they work. You can find more information about the aux switches in your owner’s manual or by contacting your local Ford dealership.
Wiring Diagram
When it comes to wiring accessories to the aux switches, you’ll need a wiring diagram to ensure that everything is connected properly. Here is a basic wiring diagram for the 2019 Ford Raptor aux switches:
| Switch | Wire Color | Function |
|---|---|---|
| Aux 1 | Red/black | 12V power |
| Aux 2 | Red/blue | 12V power |
| Aux 3 | Red/yellow | 12V power |
| Aux 4 | Red/green | 12V power |
| Aux 5 | Red/white | 12V power |
| Aux 6 | Red/orange | 12V power |
Note that the wire colors may vary depending on your specific vehicle and the type of accessory you are wiring.
Aux Switch Wiring FAQ
Q: Can I wire multiple accessories to the same switch?
A: You can wire multiple accessories to the same switch as long as the total amperage does not exceed 25 amps. Be sure to use a relay if you are wiring high-amperage accessories.
Q: Do I need a separate fuse for each switch?
A: No, all of the aux switches are protected by the same 10-amp fuse in the engine compartment fuse box.
Q: Can I use the aux switches when the engine is off?
A: Yes, the aux switches are powered by a separate circuit that is always active. However, be sure to turn off any accessories before turning off the engine to avoid draining the battery.
Q: How do I remove the aux switches?
A: To remove an aux switch, gently pry it out with a flathead screwdriver or trim removal tool. Be sure to disconnect any wiring harnesses before fully removing the switch.
Q: What accessories can I wire to the aux switches?
A: You can wire a wide range of accessories to the aux switches, including lights, air compressors, winches, and more. Be sure to follow the manufacturer’s instructions and use the correct wiring and fuses for your specific accessory.
