Are you looking for a 2018 Nissan Rogue radio wiring diagram? If so, you have come to the right place. In this article, we will provide you with all the information you need to properly install and wire your new radio. We will cover everything from the tools you need, to the wiring diagrams, and even some frequently asked questions.
Tools You Will Need
Before you begin, you will need a few basic tools. These include:
- Wire cutters/strippers
- Soldering iron/solder
- Electrical tape
- Phillips head screwdriver
Make sure you have all of these tools on hand before you start your installation.
Wiring Diagram
The wiring diagram for the 2018 Nissan Rogue radio is fairly simple. There are only a few wires that you need to connect. They are:
| Wire Color | Function |
|---|---|
| Red | 12V Accessory |
| Yellow | 12V Constant |
| Black | Ground |
| Blue | Power Antenna |
| Orange | Illumination |
| White/White with Black Stripe | Front Left Speaker |
| Gray/Gray with Black Stripe | Front Right Speaker |
| Green/Green with Black Stripe | Rear Left Speaker |
| Purple/Purple with Black Stripe | Rear Right Speaker |
Make sure you connect each wire to the corresponding wire on your new radio. Failure to do so could result in damage to your radio, or even your vehicle.
Frequently Asked Questions
Do I need to connect all of the wires?
Yes, you must connect all of the wires in order for your new radio to function properly.
What should I do if my wires are different colors?
If your wires are different colors than those listed in the diagram, you should consult your vehicle’s owner manual or contact a professional installer for guidance.
Can I connect my new radio to the factory wiring harness?
Yes, you can connect your new radio to the factory wiring harness using an adapter. This will make the installation process much easier and quicker.
What should I do if my new radio doesn’t turn on?
If your new radio doesn’t turn on, you should double check that all of the wiring connections are secure and properly connected. If everything appears to be correct, you may need to contact the manufacturer for assistance.
Can I install my new radio myself?
Yes, you can install your new radio yourself if you have the proper tools and knowledge. However, if you are unsure of what you’re doing, it is always best to consult a professional installer.
Conclusion
Now that you have a 2018 Nissan Rogue radio wiring diagram, you should be able to confidently install and wire your new radio. Remember to take your time, double check your wiring connections, and always seek professional help if you are unsure of what you’re doing.
