If you’re looking for a 2017 Ford Escape radio wiring diagram, you’ve come to the right place. This article will provide you with all the information you need to get your new radio up and running smoothly. The Ford Escape is a compact SUV that was first introduced in 2000, and since then has become a popular vehicle for families and individuals alike. The 2017 model year features a range of improvements over previous years, including an updated infotainment system with improved connectivity options. This article will focus on the wiring diagram for the 2017 Escape’s radio system, so let’s get started!
The Radio System
The 2017 Ford Escape comes with a variety of infotainment options, including a standard AM/FM radio system. The base system features a 6-speaker setup, while higher trims offer upgraded systems with additional speakers and features like SiriusXM satellite radio. Regardless of which system you have, installing a new radio requires careful attention to the wiring diagram to avoid damaging your vehicle’s electrical system.
The radio system in the 2017 Ford Escape is connected to several other systems in the vehicle, including the GPS, the vehicle’s computer, and the Bluetooth system. This means that even a small mistake in wiring can have serious consequences, so it’s essential to follow the wiring diagram closely.
The Wiring Diagram
The wiring diagram for the 2017 Ford Escape’s radio system is complex, with many different wires and connections to keep track of. However, by breaking it down into smaller sections, we can make it much easier to understand.
The wiring diagram is divided into four main sections: power supply, ground, front speaker connections, and rear speaker connections. Each section includes several wires and connections that must be properly connected to ensure the system works correctly.
Power Supply
The power supply section of the wiring diagram includes connections for the radio’s power source, as well as connections for the vehicle’s battery, ignition switch, and amp turn-on.
The red wire in the radio’s harness is the power wire, and should be connected to a switched 12V source. This means the radio will only turn on when the vehicle is running, and will turn off when the vehicle is turned off.
The yellow wire is the memory wire, and should be connected to a constant 12V source. This ensures that the radio’s settings are saved even if the vehicle’s battery is disconnected.
The black wire is the ground wire, and should be connected to a solid ground point in the vehicle.
Ground
The ground section of the wiring diagram includes connections for the radio’s ground, as well as connections for the vehicle’s chassis and power antenna.
The black wire in the radio’s harness is the ground wire, and should be connected to a solid ground point in the vehicle.
The green wire is the power antenna wire, and should be connected to the power antenna control wire in the vehicle.
Front Speaker Connections
The front speaker connections section of the wiring diagram includes connections for the radio’s front left and right speakers, as well as connections for the vehicle’s front left and right speaker wires.
The radio’s front left speaker wire is gray, while the front right speaker wire is gray/black. The vehicle’s front left speaker wire is white, while the front right speaker wire is white/black.
The wiring diagram includes a note that the front speakers are connected in parallel, which means that both speakers are connected to the same wires. This ensures that both speakers receive the same signal and operate in sync.
Rear Speaker Connections
The rear speaker connections section of the wiring diagram includes connections for the radio’s rear left and right speakers, as well as connections for the vehicle’s rear left and right speaker wires.
The radio’s rear left speaker wire is green, while the rear right speaker wire is green/black. The vehicle’s rear left speaker wire is purple, while the rear right speaker wire is purple/black.
Just like with the front speakers, the wiring diagram notes that the rear speakers are connected in parallel. This ensures that both speakers receive the same signal and operate in sync.
FAQ
| Question | Answer |
|---|---|
| What is the purpose of the memory wire? | The memory wire ensures that the radio’s settings are saved even if the vehicle’s battery is disconnected. |
| Can I connect the radio’s power wire directly to the battery? | No, the radio’s power wire should be connected to a switched 12V source. |
| What happens if I connect the wrong wire? | Connecting the wrong wire can cause serious damage to the vehicle’s electrical system, so it’s important to follow the wiring diagram closely. |
| Do I need any special tools to install a new radio? | Installing a new radio requires basic tools like wire connectors and a wire cutter/stripper, as well as a wiring diagram to ensure proper connections. |
Conclusion
Installing a new radio in your 2017 Ford Escape can be a great way to upgrade your vehicle’s entertainment options. However, it’s essential to follow the wiring diagram closely to avoid damaging your vehicle’s electrical system. By paying careful attention to the power supply, ground, front and rear speaker connections, and following the FAQ, you can ensure that your new radio operates smoothly and reliably.
