If you own a 2017 F250, you know how important it is to have a good upfitter switch wiring diagram. Upfitter switches are a set of auxiliary switches that allow you to control different types of equipment, such as lights or a winch. However, figuring out the wiring can be a bit of a challenge.
In this article, we will provide you with a comprehensive guide on the 2017 F250 upfitter switch wiring diagram. We will cover everything from the basics to the more advanced topics. Additionally, we will include tables and FAQs to make the information easier to understand.
What are Upfitter Switches?
Upfitter switches are a set of switches that are mounted in the overhead console of the cab. These switches allow you to control different types of equipment, such as lights or a winch. The switches are pre-wired and can be used to activate different types of equipment that are installed on the vehicle.
Why are Upfitter Switches Important?
Upfitter switches are important because they allow you to control different types of equipment that are installed on your vehicle. For example, if you install a set of off-road lights on your vehicle, you can use the upfitter switches to turn them on and off. Additionally, the upfitter switches are pre-wired, which makes the installation process much easier.
How Many Upfitter Switches are There?
The 2017 F250 has up to six upfitter switches available, depending on the configuration of the vehicle. The switches are numbered 1 through 6 and are located in the overhead console of the cab.
Understanding the Wiring Diagram
Before we dive into the wiring diagram, it’s important to understand the basics of how the upfitter switches work. Each switch is connected to a set of relays, which are in turn connected to the equipment that they control.
The wiring diagram for the upfitter switches is split into two sections: the control side and the load side. The control side of the wiring diagram shows how the switches are wired to the relays, while the load side shows how the relays are wired to the equipment.
The Control Side
The control side of the wiring diagram shows how the switches are wired to the relays. Each switch is wired to a specific relay, and when the switch is activated, it sends a signal to the relay to turn on the equipment that it controls.
It’s important to note that the upfitter switches are wired in a certain way to prevent accidental activation. The switches are wired in a “normally open” configuration, which means that the circuit is open when the switch is not activated. When the switch is activated, it closes the circuit and sends a signal to the relay.
The Load Side
The load side of the wiring diagram shows how the relays are wired to the equipment that they control. Each relay is connected to the equipment that it controls, such as lights or a winch.
It’s important to note that the relays are wired in a certain way to prevent damage to the vehicle’s electrical system. The relays are wired in a “normally closed” configuration, which means that the circuit is closed when the equipment is not in use. When the relay is activated, it opens the circuit and allows the equipment to operate.
Wiring Diagram Table
| Switch Number | Control Side Wiring | Load Side Wiring |
|---|---|---|
| 1 | Green/Black (Pin 10) | Gray/Yellow (Pin 87) |
| 2 | Green/Red (Pin 11) | Gray/Light Green (Pin 87A) |
| 3 | Green/White (Pin 12) | Gray/Red (Pin 87) |
| 4 | Green/Orange (Pin 13) | Gray/Light Blue (Pin 87A) |
| 5 | Green/Yellow (Pin 14) | Gray/Green (Pin 87) |
| 6 | Green/Purple (Pin 15) | Gray/Brown (Pin 87A) |
FAQs
What is the Purpose of the Upfitter Switches?
The upfitter switches allow you to control different types of equipment that are installed on your vehicle, such as lights or a winch.
How Many Upfitter Switches are There?
The 2017 F250 has up to six upfitter switches available, depending on the configuration of the vehicle.
What is the Wiring Diagram for the Upfitter Switches?
The wiring diagram for the upfitter switches is split into two sections: the control side and the load side. The control side shows how the switches are wired to the relays, while the load side shows how the relays are wired to the equipment.
How Can I Install Equipment Using the Upfitter Switches?
To install equipment using the upfitter switches, you will need to follow the wiring diagram and connect the equipment to the appropriate relay. It’s also important to make sure that the equipment is rated for the amperage of the relay.
Can I Use the Upfitter Switches to Control Aftermarket Equipment?
Yes, you can use the upfitter switches to control aftermarket equipment as long as you follow the wiring diagram and make sure that the equipment is rated for the amperage of the relay.
Do I Need to Use All of the Upfitter Switches?
No, you do not need to use all of the upfitter switches. You can use as many or as few as you need, depending on the equipment that you have installed on your vehicle.
Conclusion
The 2017 F250 upfitter switch wiring diagram is an important tool for anyone who wants to install equipment on their vehicle. By understanding how the switches and relays are wired, you can easily control different types of equipment, such as lights or a winch. Additionally, the wiring diagram makes the installation process much easier by providing a clear guide to follow.
We hope that this article has been helpful in providing a comprehensive guide to the 2017 F250 upfitter switch wiring diagram. If you have any further questions, feel free to refer to the FAQs or contact a professional for assistance.
