Tail lights are one of the most crucial parts of a vehicle. They indicate the presence, position, and size of a vehicle to other drivers, especially in low light conditions. A malfunctioning tail light can lead to dangerous situations on the road. In this article, we will discuss the wiring diagram for the 2016 Silverado tail light and provide a step-by-step guide to help you fix any wiring issues.
Overview of 2016 Silverado Tail Light Wiring Diagram
The 2016 Silverado tail light wiring diagram involves a series of wires and connections that operate the tail lights. There are three wires that power the tail light assembly: the ground wire, the running light wire, and the brake light wire. The ground wire is black, the running light wire is brown, and the brake light wire is red.
The tail light assembly also consists of a socket that holds the light bulbs. The socket has two wires: a ground wire and a power wire. The power wire is connected to the running light wire or the brake light wire, depending on which light is being operated.
| Wire Color | Function |
|---|---|
| Black | Ground wire |
| Brown | Running light wire |
| Red | Brake light wire |
Step-by-Step Guide to Fix Wiring Issues
If you are experiencing issues with your 2016 Silverado tail light, there are a few steps you can take to fix the problem.
Step 1: Check the Bulbs
The first step is to check the bulbs. Remove the tail light assembly and inspect the bulbs for any signs of damage or wear. If the bulbs are damaged or worn, replace them with new ones.
Step 2: Check the Socket
If the bulbs are in good condition, check the socket. Remove the socket and inspect it for any signs of damage, such as corrosion or melted plastic. If the socket is damaged, replace it with a new one.
Step 3: Check the Wiring
If the bulbs and socket are in good condition, the issue may be with the wiring. Use a circuit tester to check the wires for any breaks or shorts. If there are any issues with the wiring, repair or replace the affected wires.
Step 4: Test the Tail Lights
Once you have fixed any wiring issues, test the tail lights to ensure they are functioning properly. Turn on the running lights and the brake lights to check if they are working correctly.
Step 5: Check the Fuses
If the tail lights are still not working, check the fuses. The fuses for the tail lights are located in the fuse box under the hood. Check the owner’s manual for the location of the fuse box and the specific fuses that control the tail lights. Replace any blown fuses with new ones.
FAQs
Q: Why are my tail lights not working?
A: There can be several reasons why your tail lights are not working. It could be due to a blown fuse, a damaged socket, a wiring issue, or a faulty bulb. Follow the steps outlined in this article to diagnose and fix the issue.
Q: How do I replace the tail light assembly?
A: To replace the tail light assembly on a 2016 Silverado, follow these steps:
- Open the tailgate and locate the bolts that hold the tail light assembly in place.
- Remove the bolts using a socket wrench.
- Disconnect the wiring harness from the tail light assembly.
- Remove the tail light assembly from the vehicle.
- Install the new tail light assembly by following the steps in reverse order.
Q: How do I know if my tail light assembly is damaged?
A: You can tell if your tail light assembly is damaged by inspecting it for any signs of wear or damage, such as cracks, scratches, or discoloration. You can also use a circuit tester to check if the socket is receiving power.
Q: Can I fix a broken tail light socket?
A: If the tail light socket is broken, it will need to be replaced. You can purchase a replacement socket from an auto parts store or online. Simply disconnect the old socket and connect the new one using the same wires.
Q: How do I check the wiring for my tail lights?
A: To check the wiring for your tail lights, use a circuit tester to test for continuity. Connect one end of the tester to the ground wire and touch the other end to the power wire. If the tester beeps, the wiring is intact. If it does not beep, there is a break in the wiring.
Q: How do I replace a blown tail light fuse?
A: To replace a blown tail light fuse, locate the fuse box under the hood and find the fuse that controls the tail lights. Use a fuse puller to remove the blown fuse and replace it with a new one of the same amperage rating.
