Mustang enthusiasts know that the fog lights on their 1967 Mustangs are not only functional but also add a touch of style to the car’s appearance. However, the wiring of these fog lights can be confusing for some people. In this article, we will discuss the 1967 Mustang fog light wiring diagram, step by step.
What You Will Need
To successfully wire the fog lights on your 1967 Mustang, you will need a few tools and materials:
- Wire strippers and cutters
- Electrical tape
- Fog light switch
- Fog light bulbs (H11)
- Fog light wiring harness
Step-by-Step Guide
Follow these steps to wire the fog lights on your 1967 Mustang:
Step 1: Disconnect the Battery
Before beginning any electrical work on your car, always disconnect the battery. This will prevent any accidents or electrical shocks.
Step 2: Remove the Old Wiring Harness
If you are replacing old fog lights, you will need to remove the old wiring harness. Begin by removing the fog light bulbs and then disconnecting the wiring harness from the fog light assembly.
Step 3: Install the New Wiring Harness
The new fog light wiring harness should have all the necessary connectors and wires. Connect the harness to the fog light assembly and route the wires to the fog light switch location.
Step 4: Install the Fog Light Switch
Mount the fog light switch in a convenient location, such as the dash or the center console. Connect the switch to the wiring harness using the provided connectors.
Step 5: Connect the Wiring Harness to the Battery
The fog light wiring harness should have a connector that needs to be connected to the battery. Make sure this is done properly, and the connection is secure.
Step 6: Install the Fog Light Bulbs
Install the fog light bulbs (H11), making sure they are properly mounted and connected to the wiring harness.
Step 7: Test the Fog Lights
Once everything is connected, turn on the fog light switch and test the lights. Make sure they are working properly before continuing.
FAQ
1. Can I wire the fog lights without a wiring harness?
It is not recommended to wire the fog lights without a wiring harness, as this can pose a safety hazard. A wiring harness ensures that the fog lights are properly connected and powered.
2. Can I use different bulbs for my fog lights?
It is recommended to use the H11 bulbs for your 1967 Mustang fog lights, as this is the correct bulb type for this car model. Using different bulbs may result in poor performance or damage to the fog lights.
3. Can I mount the fog light switch anywhere in the car?
The fog light switch can be mounted in any convenient location, such as the dash or the center console. However, make sure it is easily accessible and does not obstruct the driver’s view.
Conclusion
Wiring the fog lights on your 1967 Mustang can seem daunting, but by following this guide, you can do it yourself. Remember to always disconnect the battery before beginning any electrical work and make sure to test the fog lights once they are installed. With the right tools and materials, you can have functioning and stylish fog lights on your Mustang in no time.
