Introduction
If you’re looking to upgrade the stereo in your 2015 Mitsubishi Mirage, you’ll need to know how to connect the wires properly. A wiring diagram is essential for this task, as it shows you which wires to connect and where.
In this article, we’ll provide you with a detailed wiring diagram for the 2015 Mitsubishi Mirage stereo system, as well as step-by-step instructions on how to install the new stereo.
Before You Begin
Before you start installing your new stereo, there are a few things you’ll need to do:
- Make sure you have all the necessary tools, including screwdrivers, wire cutters, and wire strippers.
- Disconnect the negative terminal of your battery to prevent any electrical shock.
- Read the instructions that came with your new stereo to familiarize yourself with its features and installation requirements.
Once you’ve taken these steps, you’re ready to start installing your new stereo.
Wiring Diagram
Here is the wiring diagram for the 2015 Mitsubishi Mirage stereo system:
| Wire Color | Function | Location |
|---|---|---|
| Yellow | Battery | Connector A, Pin 1 |
| Red | Accessory | Connector A, Pin 2 |
| Black | Ground | Connector A, Pin 3 |
| Blue/White | Remote | Connector A, Pin 4 |
| White | Front Left Speaker Positive | Connector B, Pin 1 |
| White/Black | Front Left Speaker Negative | Connector B, Pin 2 |
| Gray | Front Right Speaker Positive | Connector B, Pin 3 |
| Gray/Black | Front Right Speaker Negative | Connector B, Pin 4 |
| Green | Rear Left Speaker Positive | Connector B, Pin 5 |
| Green/Black | Rear Left Speaker Negative | Connector B, Pin 6 |
| Purple | Rear Right Speaker Positive | Connector B, Pin 7 |
| Purple/Black | Rear Right Speaker Negative | Connector B, Pin 8 |
Make sure to match the wires from your new stereo to these locations on your car’s wiring harness.
FAQ
Q: What if my car’s wires are a different color than the diagram?
A: Some car manufacturers may use different wire colors for their stereo systems. In this case, you’ll need to use a multimeter to determine which wires correspond to which functions.
Q: Can I install a new stereo myself?
A: Yes, installing a new stereo is a fairly simple task as long as you have the correct wiring diagram and tools. However, if you’re unsure about your ability to do it yourself, it’s best to consult a professional.
Q: Will installing a new stereo void my car’s warranty?
A: No, installing a new stereo should not void your car’s warranty. However, if the installation causes damage to your car, that damage may not be covered by the warranty.
Q: Can I still use my car’s steering wheel controls with a new stereo?
A: Yes, many new stereos are compatible with steering wheel control adapters that allow you to retain this functionality.
Q: What if I don’t want to do the installation myself?
A: If you don’t want to install the new stereo yourself, you can take it to a professional stereo installer who can do it for you.
Conclusion
Installing a new stereo in your 2015 Mitsubishi Mirage is a great way to upgrade your car’s audio system. By following our wiring diagram and step-by-step instructions, you can do it yourself with confidence, or consult a professional installer if you prefer.
Now that you know how to install a new stereo in your car, you can enjoy your favorite music with improved sound quality while driving.
