The 2014 Chevrolet Silverado is a full-size pickup truck that boasts a lot of features, including a backup camera. While this feature comes standard on some models, it is not available on all of them. If your Silverado doesn’t have a backup camera, you can install one yourself. This article will guide you through the process of installing a backup camera in your 2014 Silverado and provide you with a wiring diagram to make it easier.
What You Will Need
The first step in installing a backup camera in your Silverado is to gather all the necessary tools and equipment. Here’s a list of everything you will need:
| Wire stripper/cutter | Screwdriver | Socket wrench set |
| Drill and drill bits | Fish tape | Backup camera |
| Backup camera monitor | Wiring harness | Zip ties |
Once you have gathered all the necessary tools and equipment, you can move on to the installation process.
Installation Process
The installation process for a backup camera in a Silverado is relatively straightforward. Here are the steps you need to follow:
Step 1: Remove the Tailgate Handle
The first step in the installation process is to remove the tailgate handle. To do this, you will need to use a socket wrench set to remove the bolts that hold the handle in place.
Step 2: Drill a Hole for the Camera
Next, you will need to drill a hole for the backup camera. The best location for the camera is in the center of the tailgate, just above the handle. Use a 3/8 inch drill bit to drill the hole.
Step 3: Route the Camera Wiring
Once you have drilled the hole for the camera, you will need to route the camera wiring. To do this, use fish tape to push the wiring through the tailgate and into the truck bed. Be careful not to damage any of the wires while doing so.
Step 4: Install the Camera
After the wiring is in place, you can install the backup camera. To do this, insert the camera into the hole you drilled earlier and secure it using screws. Be sure to tighten the screws securely to prevent the camera from moving or falling out.
Step 5: Connect the Wiring Harness
Next, you will need to connect the wiring harness to the camera. The wiring harness will have a connector that plugs into the camera and another connector that plugs into the backup camera monitor.
Step 6: Install the Backup Camera Monitor
The final step in the installation process is to install the backup camera monitor. The monitor can be installed on the dashboard, the rearview mirror, or any other location that is convenient for you. Use zip ties to secure the wiring and prevent it from dangling or getting in the way.
Wiring Diagram
Here is a wiring diagram that will help you connect the backup camera to your 2014 Silverado:
| Camera Wiring | Wire Color | Function |
| Red | 12V | Power |
| Black | GND | Ground |
| Yellow | AVA | Video Out |
To connect the wiring harness to the backup camera monitor, follow these steps:
| Wiring Harness | Wire Color | Camera Monitor | Function |
| Red | 12V | Red | Power |
| Black | GND | Black | Ground |
| Yellow | AVA | Yellow | Video In |
Frequently Asked Questions
1. Do I need to drill a hole for the backup camera?
Yes, you will need to drill a hole for the backup camera. This is the best location for the camera and will provide you with the best view.
2. Do I need any special tools or equipment to install a backup camera in my Silverado?
You will need a few basic tools and equipment, such as a screwdriver and a socket wrench set. Additionally, you will need a backup camera and monitor, a wiring harness, and some zip ties.
3. Can I install a backup camera on my own?
Yes, you can install a backup camera on your own. The process is relatively straightforward and can be completed in a few hours.
4. Is it necessary to use a wiring harness?
Yes, it is necessary to use a wiring harness. The wiring harness will ensure that the camera and monitor are connected properly and will prevent any electrical issues from occurring.
5. Where should I install the backup camera monitor?
You can install the backup camera monitor on the dashboard, the rearview mirror, or any other location that is convenient for you. Be sure to secure the wiring using zip ties to prevent it from getting in the way.
Conclusion
Installing a backup camera in your 2014 Silverado is a great way to improve safety and make driving easier. With the right tools and equipment, you can complete this project on your own in just a few hours. Follow the steps outlined in this article and refer to the wiring diagram to ensure that everything is connected properly.
