Are you looking for a wiring diagram for your Ford Fusion’s speakers? If so, you’ve come to the right place. In this article, we’ll go over the wiring diagram for the 2014 Ford Fusion’s speakers and answer some frequently asked questions. Let’s get started!
Speaker Wiring Diagram
Before we get into the details of the wiring diagram, it’s important to understand the different components in your car’s audio system. The audio system in the 2014 Ford Fusion consists of four speakers: two front door speakers and two rear shelf speakers. Each speaker is connected to a separate channel on the car’s amplifier.
The wiring diagram for the 2014 Ford Fusion’s speakers is as follows:
| Speaker | Circuit | Wire color |
|---|---|---|
| Left front door | A+ | Gray/Red |
| Left front door | A- | Tan/Yellow |
| Right front door | B+ | Orange/Red |
| Right front door | B- | White/Yellow |
| Left rear shelf | C+ | Blue/Red |
| Left rear shelf | C- | Brown/Yellow |
| Right rear shelf | D+ | Pink/Red |
| Right rear shelf | D- | Green/Yellow |
The A+ and A- circuits are for the left front door speaker, while the B+ and B- circuits are for the right front door speaker. The C+ and C- circuits are for the left rear shelf speaker, and the D+ and D- circuits are for the right rear shelf speaker.
Left Front Door Speaker
The left front door speaker is connected to the A+ and A- circuits. The Gray/Red wire is the positive wire and should be connected to the A+ circuit, while the Tan/Yellow wire is the negative wire and should be connected to the A- circuit. When you’re connecting the wires, make sure to not mix up the positive and negative wires as this can affect the sound quality of your audio system.
If you’re replacing the left front door speaker, make sure to get a speaker that has the same impedance rating as the original speaker. The impedance rating is usually printed on the speaker or on the packaging.
Right Front Door Speaker
The right front door speaker is connected to the B+ and B- circuits. The Orange/Red wire is the positive wire and should be connected to the B+ circuit, while the White/Yellow wire is the negative wire and should be connected to the B- circuit. Again, make sure to not mix up the wires when connecting them.
If you’re replacing the right front door speaker, get a speaker with the same impedance rating as the original speaker.
Left Rear Shelf Speaker
The left rear shelf speaker is connected to the C+ and C- circuits. The Blue/Red wire is the positive wire and should be connected to the C+ circuit, while the Brown/Yellow wire is the negative wire and should be connected to the C- circuit.
When replacing the left rear shelf speaker, make sure to get a speaker with the same impedance rating as the original speaker.
Right Rear Shelf Speaker
The right rear shelf speaker is connected to the D+ and D- circuits. The Pink/Red wire is the positive wire and should be connected to the D+ circuit, while the Green/Yellow wire is the negative wire and should be connected to the D- circuit.
Again, make sure to not mix up the wires when connecting them. Also, make sure to get a replacement speaker with the same impedance rating as the original speaker.
FAQ
Can I use aftermarket speakers with my 2014 Ford Fusion?
Yes, you can use aftermarket speakers with your 2014 Ford Fusion. However, make sure to get speakers with the same impedance rating as the original speakers to avoid damaging your car’s amplifier. Also, make sure to follow the wiring diagram carefully when installing the new speakers.
What is speaker impedance?
Speaker impedance is the resistance that a speaker offers to the flow of electrical current. It’s measured in ohms and can range from 2 ohms to 16 ohms. The impedance rating of your car’s speakers is important because it affects the amount of power that the amplifier sends to the speakers.
How do I connect the wires to the speakers?
To connect the wires to the speakers, you’ll need to strip the ends of the wires using wire strippers. Then, connect the positive wire to the positive terminal on the speaker and the negative wire to the negative terminal on the speaker. Make sure to tighten the screws on the terminals to ensure a good connection.
What if I’m not sure which wire is the positive wire?
If you’re not sure which wire is the positive wire, you can use a multimeter to test the wires. Set the multimeter to measure DC voltage and touch the positive lead to one wire and the negative lead to the other wire. If you see a voltage reading, the wire that the positive lead is touching is the positive wire.
Can I use different types of speakers in my car’s audio system?
Yes, you can use different types of speakers in your car’s audio system. However, make sure to get speakers with the same impedance rating as the original speakers to avoid damaging your car’s amplifier. Also, keep in mind that using different types of speakers can affect the overall sound quality of your audio system.
Conclusion
In conclusion, the wiring diagram for the 2014 Ford Fusion’s speakers consists of eight circuits that connect four speakers to the car’s amplifier. When replacing speakers or installing aftermarket speakers, make sure to follow the wiring diagram carefully and get speakers with the same impedance rating as the original speakers.
