If you have a 2010 Kia Soul and you’re looking to install an amplifier, you’re going to need a wiring diagram. In this article, we’ll provide you with everything you need to know to get your amplifier installed and sounding great.
What You’ll Need
Before we get started, let’s go over what you’ll need to install your amplifier:
| Item | Description |
|---|---|
| Amplifier | A 2-channel or 4-channel amplifier, depending on your needs |
| Wiring Kit | A wiring kit that includes power and ground wires, RCA cables, and speaker wire |
| Locating the Factory Amplifier | The factory amplifier is located under the passenger seat. Remove the seat and carpet to access the amplifier. The amplifier is a silver box with a wiring harness connected to it. |
| Factory Wiring Diagram | You’ll need the factory wiring diagram to properly wire your amplifier. You can find the diagram in your owner’s manual or online. |
Wiring Your Amplifier
Before you begin: Disconnect the negative battery cable to prevent any electrical short circuits.
Step 1: Run the power wire from the battery to the amplifier. Connect the power wire to the positive battery terminal and secure it with a fuse holder within 18 inches of the battery. Run the power wire through the car’s firewall and under the carpet to the amplifier.
Step 2: Run the ground wire from the amplifier to a clean, solid metal surface. Make sure the surface is free of paint, rust, or debris. Use a self-tapping screw to secure the ground wire to the surface.
Step 3: Connect the RCA cables from the amplifier to the factory head unit. The head unit is located in the center console of the car. You’ll need to remove the head unit to access the wiring. Connect the RCA cables to the head unit’s preamp outputs.
Step 4: Connect the speaker wire from the amplifier to the speakers. The speakers are located in the doors and rear of the car. Remove the door panels and rear speaker covers to access the wiring. Connect the speaker wire to the positive and negative speaker terminals.
Step 5: Connect the remote turn-on wire from the amplifier to the head unit’s remote wire. The remote wire is usually a blue or blue/white wire located on the back of the head unit. Connect the remote wire to the amplifier’s remote terminal.
FAQ
Q: Can I install an amplifier without a wiring kit?
A: No, you’ll need a wiring kit to properly install your amplifier. A wiring kit includes all the necessary wires and connectors to complete the installation.
Q: Can I use the factory wiring to install my amplifier?
A: No, using the factory wiring can result in poor sound quality and potential damage to your amplifier. It’s best to use a wiring kit and follow the wiring diagram for your specific vehicle.
Q: What size amplifier should I use for my Kia Soul?
A: The size of your amplifier will depend on your specific needs. A 2-channel amplifier is recommended if you’re only looking to power your front speakers, while a 4-channel amplifier is recommended if you’re looking to power all of your speakers.
Q: Can I install an amplifier myself?
A: Yes, an amplifier can be installed by anyone with basic knowledge of car audio systems. However, if you’re not comfortable with the installation process, it’s best to have a professional install it for you.
By following this guide and using the provided wiring diagram, you’ll be able to install your amplifier and enjoy great sound in your 2010 Kia Soul. Remember to always follow safety precautions and take your time to ensure a proper installation.
