Are you looking for a wiring diagram for the wiper motor of your 1964 Impala? Look no further! In this article, we will discuss the wiring diagram of the wiper motor and provide all the information you need to get your wipers working properly again.
Introduction
The 1964 Impala is a classic car that has been cherished by many car enthusiasts for years. However, as with any classic car, the wiring may have deteriorated over time and may need to be replaced. The wiper motor wiring is a common issue that many 1964 Impala owners face, and this article will provide a solution to this problem.
What is a wiper motor?
A wiper motor is an electric motor that powers the windshield wipers. The motor is controlled by the wiper switch, which is located on the dashboard of the car. The wiper switch sends a signal to the motor to turn on or off, and also controls the speed of the wipers.
Why is the wiper motor wiring important?
The wiring of the wiper motor is important because it ensures that the motor receives the correct amount of power and is able to function properly. If the wiring is incorrect or damaged, the wiper motor may not work at all or may work intermittently.
Wiper Motor Wiring Diagram
Below is a wiring diagram for the 1964 Impala wiper motor.
| Wire Color | Function |
|---|---|
| Yellow | Park Switch |
| Dark Green | Low Speed |
| Light Blue | High Speed |
| Black | Ground |
The yellow wire is connected to the park switch, which is responsible for parking the wipers in the correct position when they are turned off. The dark green wire controls the low speed of the wipers, while the light blue wire controls the high speed. The black wire is the ground wire, which provides the return path for the current.
FAQs
What should I do if my wipers are not working at all?
If your wipers are not working at all, there may be a problem with the wiper motor or the wiring. Check the wiring to make sure it is connected properly, and test the motor to make sure it is receiving power. If the motor is not receiving power, there may be a problem with the wiper switch or the wiring between the switch and the motor.
What should I do if my wipers are working intermittently?
If your wipers are working intermittently, there may be a problem with the wiring. Check the wiring for any damage or loose connections, and make sure that the ground wire is connected properly. If the wiring is in good condition, there may be a problem with the wiper motor itself.
Can I replace the wiper motor wiring myself?
Yes, replacing the wiper motor wiring is a relatively simple task that can be done by anyone with basic electrical knowledge. It is important to make sure that the wiring is connected properly and that the correct wiring diagram is used.
Where can I find a replacement wiper motor wiring?
You can find a replacement wiper motor wiring at your local auto parts store or online. It is important to make sure that the wiring is compatible with your 1964 Impala and that it is of high quality.
Conclusion
The wiring of the wiper motor is an important component of your 1964 Impala’s electrical system. By following the wiring diagram and using the information provided in this article, you can ensure that your wipers are functioning properly and that your car is driving safely.
