When it comes to upgrading your 2007 Saturn Aura’s audio system, a wiring diagram is essential. This article will guide you on wiring your stereo system step-by-step. We have also included FAQs and tables to help answer any questions you might have.
Before You Start
Before we start with the wiring guide, let us discuss some things you need to consider. First, make sure you have the right tools such as wire strippers, electrical tape, connectors, and crimping tools. Secondly, disconnect the negative cable from the battery to avoid any electrical accidents while fixing your car’s audio system.
Lastly, read the user manual of your 2007 Saturn Aura and the new audio system that you will install. The manual will give you information that can help you wire the new audio system correctly without damaging the car’s electrical system.
Wiring Your Saturn Aura’s Audio System
Follow the steps below to ensure that you wire your car’s audio system accurately:
Step 1: Remove the Saturn Aura’s stereo system
The first step in wiring your car’s audio system is to remove the old stereo system. Use a panel removal tool to remove the panels and access the stereo system. Once you have removed the old system, you can start wiring the new one.
Step 2: Identify the wiring harness
Identify the wiring harness of your 2007 Saturn Aura’s audio system. The wiring harness is the collection of wires that connect the audio system to the car’s electrical system. Locate the wire that connects the audio system to the car’s power source.
Step 3: Connect the wires
Connect the wires of your new audio system to the wires of the Saturn Aura. The color codes of the wires usually vary depending on the manufacturer. Check the user manual of your audio system to identify the color codes of the wires. Use a wire stripper to remove the insulation from the wires and connect them using appropriate connectors.
Step 4: Secure the wires
Once you have connected the wires, use electrical tape to secure them. Make sure that the wires are correctly connected and none of them are loose or exposed.
Step 5: Reassemble the audio system
After wiring your car’s audio system, reassemble the audio system and turn on the car to check if it works. If it doesn’t work, troubleshoot and recheck your wiring. Only reassemble the audio system once you are sure that the audio system works correctly.
FAQs
1. Can I install a new audio system in my car even if I am not an expert in car audio systems?
Yes, you can. However, it is highly recommended that you read the user manual of your 2007 Saturn Aura and the audio system you will install. You can also seek help from experts to avoid damaging your car’s electrical system.
2. How do I connect the wires of my new audio system to my 2007 Saturn Aura’s wiring harness?
You can connect the wires using appropriate connectors. First, identify the color codes of the wires of both the audio system and the car. Then, use a wire stripper to remove the insulation from the wires and connect them using connectors.
3. Can I use any wiring diagram I find online for my 2007 Saturn Aura’s audio system?
No, you should only use a wiring diagram that is specific to your car’s make and model. Using a wiring diagram that is not specific to your car may cause damage to your car’s electrical system.
Tables
| Wire Color | Function |
|---|---|
| Red | 12V constant power |
| Yellow | 12V switched power |
| Black | Ground |
| Blue | Power antenna |
| Orange | Illumination |
Make sure to follow the steps in this guide to ensure that you wire your 2007 Saturn Aura’s audio system correctly. Remember to read the user manual of both your car and the new audio system you will install to get accurate information. Seek help from experts if you are not confident in wiring the system yourself. Good luck!
