Hyundai Tiburon is a sport compact car produced by Hyundai Motor Company from 1996 to 2008. The Tiburon is known for its sleek design and performance-oriented features. However, if you are looking to replace or upgrade the factory radio in your 2007 Hyundai Tiburon, you will need to know the right wiring diagram.
Overview
The radio wiring diagram for a 2007 Hyundai Tiburon provides guidance on connecting aftermarket radios to the car’s wiring harness. The wiring diagram shows the color codes and the function of each wire. This information is essential for a hassle-free installation of a new radio. Here is a detailed guide to help you understand the wiring diagram.
Radio Wiring Codes
The radio wiring diagram for a 2007 Hyundai Tiburon consists of codes that represent the different wires. Here is a list of the color codes and what they represent:
| Wire Color | Function |
|---|---|
| Red | Battery +12V |
| Yellow | Battery +12V |
| Black | Ground |
| Blue | Power Antenna |
| White | Front Left Speaker (+) |
| White/Black | Front Left Speaker (-) |
| Grey | Front Right Speaker (+) |
| Grey/Black | Front Right Speaker (-) |
| Green | Rear Left Speaker (+) |
| Green/Black | Rear Left Speaker (-) |
| Purple | Rear Right Speaker (+) |
| Purple/Black | Rear Right Speaker (-) |
Dashboard Removal
Before you can access the factory radio’s wiring harness, you will need to remove the dashboard panel. Here is a step-by-step guide to remove the dashboard:
Step 1: Disconnect the negative battery cable to avoid electrical shock.
Step 2: Remove the screws that hold the dashboard panel in place.
Step 3: Gently pull the dashboard panel to release the clips that hold it to the dash.
Step 4: Disconnect the wiring harnesses that are connected to the back of the dashboard panel.
Wiring Harness Connection
Once you have removed the dashboard panel, you can access the factory radio’s wiring harness. Here is a step-by-step guide to connect the new radio:
Step 1: Identify the wire color codes and their functions using the radio wiring diagram.
Step 2: Connect the wires of the new radio to the corresponding wires of the car’s wiring harness using crimp connectors.
Step 3: Test the new radio to ensure it is working correctly.
FAQ
How do I know which wire is the ground wire?
The ground wire is usually black or brown. You can use a multimeter to check which wire has continuity with the car’s metal chassis.
Can I install a new radio without removing the dashboard panel?
No, you will need to remove the dashboard panel to access the factory radio’s wiring harness.
What if my new radio has extra wires that are not on the wiring diagram?
Some aftermarket radios may have additional wires for features like steering wheel controls, reverse camera, etc. You can refer to the radio’s instruction manual to know how to connect these wires.
What if I damage the wiring harness while removing it?
If you damage the wiring harness, you can buy a replacement harness from a car audio store or from Hyundai directly.
Can I use the same wiring diagram for a different year Tiburon?
No, the wiring diagram may be different for different year models. Be sure to use the right wiring diagram for your 2007 Hyundai Tiburon.
With this guide, you can now confidently install a new radio in your 2007 Hyundai Tiburon. Remember to always follow safety precautions and double-check all connections before testing the new radio.
