If you’re looking for a wiring diagram for your 96 Ford Explorer radio, you’ve come to the right place. In this article, we’ll go over the various wires and connections that are involved in hooking up the radio in your Explorer.
What You’ll Need
Before we get started, let’s go over what you’ll need to complete this project:
| Item | Description |
|---|---|
| Wire stripper | To strip the insulation off wires |
| Crimping tool | To secure connections between wires and terminals |
| Tape | To protect connections and prevent short circuits |
| 96 Ford Explorer radio wiring diagram | To ensure proper connections |
Wiring Diagram
Here is the wiring diagram for a 96 Ford Explorer radio:
| Wire Color | Function |
|---|---|
| Yellow/Red | Battery |
| Black/Light Green | Ground |
| Red/Black | Ignition |
| Blue | Power Antenna |
| White/Green | Left Front Speaker – |
| Orange/Green | Left Front Speaker + |
| Green/Orange | Right Front Speaker – |
| White/Orange | Right Front Speaker + |
| Black/Pink | Left Rear Speaker – |
| Blue/Pink | Left Rear Speaker + |
| Yellow/Pink | Right Rear Speaker – |
| Green/Yellow | Right Rear Speaker + |
Wires and Connections
Now that you have the wiring diagram, let’s go over each wire and its corresponding function:
Battery
The yellow/red wire is the battery wire. This wire is connected to the positive terminal of the battery and provides power to the radio even when the ignition is turned off.
Ground
The black/light green wire is the ground wire. This wire is connected to the negative terminal of the battery or a metal ground point in the car to complete the circuit.
Ignition
The red/black wire is the ignition wire. This wire is connected to the ignition switch and provides power to the radio when the key is turned to the “on” position.
Power Antenna
The blue wire is the power antenna wire. This wire is connected to the power antenna control unit and provides power to the antenna when the radio is turned on.
Front Speakers
The front speakers are connected to the white/green, orange/green, green/orange, and white/orange wires. The white/green and orange/green wires are the left front speaker wires, while the green/orange and white/orange wires are the right front speaker wires.
Rear Speakers
The rear speakers are connected to the black/pink, blue/pink, yellow/pink, and green/yellow wires. The black/pink and blue/pink wires are the left rear speaker wires, while the yellow/pink and green/yellow wires are the right rear speaker wires.
FAQ
What size wire should I use?
For the battery and ground wires, it is recommended to use 10-gauge wire. For the other wires, 18-gauge wire should suffice.
What is a crimping tool?
A crimping tool is used to secure connections between wires and terminals. It compresses the metal sleeve of the terminal onto the wire to create a secure connection.
Do I need to use tape?
Although not required, it is recommended to use tape to protect connections and prevent short circuits. Electrical tape or heat shrink tubing can be used for this purpose.
What if my radio has different wire colors?
If your radio has different wire colors than those listed in the wiring diagram, you may need to consult the user manual for your specific radio model or contact the manufacturer for assistance.
Can I install the radio myself?
Yes, it is possible to install the radio yourself if you have the proper tools and knowledge. However, if you are unsure about any aspect of the installation process, it is recommended to seek the assistance of a professional.
We hope this article has been helpful in guiding you through the process of wiring your 96 Ford Explorer radio. Remember to always use caution when working with electrical components and follow the wiring diagram closely to ensure a successful installation.
