Power window motors are a common feature in modern vehicles, allowing drivers to easily roll their windows up and down with the push of a button. If you’re looking to wire a new power window motor into your vehicle, it’s important to understand the process and the wiring diagram. In this article, we’ll cover the basics of a 6 pin power window motor wiring diagram, including frequently asked questions and useful tables.
Understanding the 6 Pin Power Window Motor Wiring Diagram
The 6 pin power window motor wiring diagram consists of six wires that are connected to the motor. These wires have different functions, and it’s important to understand what each one does before attempting to wire the motor. The six wires are:
| Wire | Color | Function |
|---|---|---|
| 1 | Black | Ground |
| 2 | Green | Up |
| 3 | White | Down |
| 4 | Red | Positive Power |
| 5 | Blue | Window Illumination |
| 6 | Yellow | Positive Power |
These wires are typically used in aftermarket power window kits, and may differ in color or numbering depending on the specific motor you are working with. In general, black wires are ground, red wires are positive power, and green and white wires are the up and down signals.
Wiring the 6 Pin Power Window Motor
Wiring a 6 pin power window motor is a straightforward process, but it’s important to follow the wiring diagram carefully to avoid damaging the motor or causing an electrical short. Here’s a step-by-step guide:
- Connect the black wire to the vehicle’s ground, typically located under the dashboard.
- Connect the green wire to the up switch, and the white wire to the down switch.
- Connect the red wire to a 12-volt positive power source, such as the vehicle’s battery terminal.
- Connect the blue wire to the window illumination circuit.
- Connect the yellow wire to another 12-volt positive power source, such as a fuse box or relay.
- Test the wiring by pressing the up and down switches, and make any necessary adjustments if the window doesn’t move properly.
It’s important to ensure that all wires are properly connected and secured, and that there are no exposed wires or loose connections that could cause an electrical short or fire.
Frequently Asked Questions
Q: Can I use a 6 pin power window motor in a vehicle that doesn’t have power windows?
A: It’s possible, but you will need to install a power window kit and wiring harness to connect the motor to the vehicle’s electrical system.
Q: Can I connect multiple power window motors to a single switch?
A: Yes, you can connect multiple motors in parallel to a single switch, as long as the switch and wiring can handle the additional current load.
Q: What should I do if my power window motor isn’t working?
A: Check the wiring diagram and connections to ensure that all wires are properly connected and secured, and that there are no exposed wires or loose connections. If the wiring is correct, the motor may be faulty and will need to be replaced.
Conclusion
A 6 pin power window motor is a useful and convenient feature in modern vehicles, and understanding the wiring diagram is crucial for proper installation and operation. By following the wiring diagram carefully and making any necessary adjustments, you can enjoy the convenience and comfort of power windows in your vehicle.
