The 2N IP Force is a rugged intercom designed for use in harsh outdoor environments. It features an HD camera, a microphone and a speaker, all housed in a vandal-resistant casing. However, before you can take advantage of its features, you need to know how to connect it to other devices in your network. In this article, we’ll provide you with a wiring diagram for the 2N IP Force, as well as some frequently asked questions about its installation.
Wiring Diagram for the 2N IP Force
The 2N IP Force can be powered via PoE (Power over Ethernet) or an external power supply. It also has two Ethernet ports, one for PoE and the other for LAN. The following diagram shows how you can connect the 2N IP Force to a network using PoE.
| Port | Function | Color code | Wire pinout |
|---|---|---|---|
| LAN | Network connection | Blue and green | T568A or T568B |
| PoE | Power over Ethernet | Brown and orange | T568A or T568B |
To connect the 2N IP Force to your network, follow these steps:
Step 1: Connect the LAN port
Connect one end of an Ethernet cable to the LAN port of the 2N IP Force, and the other end to a switch or router on your network.
Step 2: Connect the PoE port
If you’re using PoE to power the intercom, connect one end of another Ethernet cable to the PoE port, and the other end to a PoE switch or injector.
Step 3: Connect external devices
If you want to connect external devices, such as a door lock or a card reader, you’ll need to use the two relay outputs and the two digital inputs on the 2N IP Force. These are located on the back panel, as shown in the diagram below:
| Function | Color code | Wire pinout |
|---|---|---|
| Relay 1 | Grey and purple | T568A or T568B |
| Relay 2 | White and brown | T568A or T568B |
| Digital input 1 | Orange and grey | T568A or T568B |
| Digital input 2 | Green and brown | T568A or T568B |
To connect external devices, simply connect their wires to the corresponding terminals on the 2N IP Force.
FAQ
Q: Can I use a non-PoE switch to power the 2N IP Force?
A: Yes, you can use a non-PoE switch as long as you use an external PoE injector to supply power to the 2N IP Force.
Q: Can I use the 2N IP Force with a third-party video surveillance system?
A: Yes, the 2N IP Force supports ONVIF, which is an open standard for video surveillance systems.
Q: How many relays and digital inputs does the 2N IP Force have?
A: The 2N IP Force has two relay outputs and two digital inputs.
Q: Can I use the 2N IP Force with a wireless network?
A: Yes, you can connect the 2N IP Force to a wireless network using a wireless bridge or access point.
Q: Can I use the 2N IP Force with SIP-based phone systems?
A: Yes, the 2N IP Force supports SIP, which is a protocol used by many phone systems.
In conclusion, the 2N IP Force is a powerful and versatile intercom that can be integrated into a variety of network environments. By following the wiring diagram and tips provided in this article, you can ensure a smooth and trouble-free installation process.
