The 2019 Ford Ranger is a great choice for those who are looking for a reliable and versatile pickup truck. Whether you are hauling construction materials, off-road gear, or camping supplies, the Ranger can handle it all. However, when it comes to towing a trailer, it is important to know the wiring diagram to ensure that you have a safe and secure connection with your trailer. In this article, we will discuss the 2019 Ford Ranger trailer wiring diagram and answer some frequently asked questions.
What is a Trailer Wiring Diagram?
A trailer wiring diagram is a schematic representation of the electrical connections that are required to connect a trailer to a tow vehicle. The diagram shows the different components of the trailer wiring system, including the wires, connectors, and circuits. It is important to understand the wiring diagram in order to ensure that you have a proper and safe connection between your towing vehicle and the trailer.
Table 1 – Color Codes for Trailer Wiring
| Wire Color | Function |
|---|---|
| Green | Right Turn Signal and Brake |
| Yellow | Left Turn Signal and Brake |
| Brown | Tail/Marker Light |
| White | Ground |
The table above shows the color codes that are used in the trailer wiring system. Each wire color corresponds to a specific function, such as the right and left turn signals, the brake lights, and the tail/marker lights. It is important to follow these color codes when wiring your trailer to ensure that the electrical connection is correct and safe.
2019 Ford Ranger Trailer Wiring Diagram
The 2019 Ford Ranger has a standard six-pin trailer wiring harness. The wiring diagram for this harness is as follows:
Table 2 – 2019 Ford Ranger Trailer Wiring Diagram
| Pin | Wire Color | Function |
|---|---|---|
| 1 | Green | Right Turn Signal and Brake |
| 2 | Yellow | Left Turn Signal and Brake |
| 3 | Brown | Tail/Marker Light |
| 4 | White | Ground |
| 5 | Blue | Electric Brake |
| 6 | Red | Auxiliary Power |
The six-pin trailer wiring harness on the 2019 Ford Ranger is designed to provide a secure and reliable connection between the towing vehicle and the trailer. The wiring diagram shows the different pins and wires that are used to connect the trailer lights, brakes, and other electrical components to the Ranger.
How to Install a Trailer Wiring Harness on a 2019 Ford Ranger
Installing a trailer wiring harness on a 2019 Ford Ranger is a simple and straightforward process. Here are the steps:
Step 1 – Gather Your Tools and Materials
Before you begin the installation process, make sure that you have all the necessary tools and materials. You will need a trailer wiring harness kit, a wire stripper/cutter, and electrical tape.
Step 2 – Locate the Factory Wiring Harness
The factory wiring harness on the 2019 Ford Ranger can be found near the rear bumper, on the driver’s side. Look for a small plastic cover over the connector. Remove the cover to access the harness.
Step 3 – Install the Trailer Wiring Harness
Connect the trailer wiring harness to the factory wiring harness by matching the wire colors and inserting the connectors into the corresponding ports. Use electrical tape to secure the connectors and prevent them from coming loose.
Step 4 – Test the Electrical Connection
Once the wiring harness is installed, test the electrical connection by connecting the trailer to the Ranger and turning on the lights and brakes. Check that all the lights are working properly and that the brakes are functioning as they should. Make any necessary adjustments or repairs before hitting the road.
FAQ
What is the towing capacity of a 2019 Ford Ranger?
The towing capacity of a 2019 Ford Ranger varies depending on the model and configuration. The maximum towing capacity for the Ranger is 7,500 pounds when properly equipped.
Do I need a special license to tow a trailer with a 2019 Ford Ranger?
No, you do not need a special license to tow a trailer with a 2019 Ford Ranger. However, it is important to ensure that you have the appropriate equipment and that you are following all applicable laws and regulations.
What is the difference between a four-pin and six-pin trailer wiring harness?
A four-pin trailer wiring harness is designed for trailers with basic lighting systems, such as tail lights, brake lights, and turn signals. A six-pin trailer wiring harness includes additional wires for more complex trailer systems, such as electric brakes and charging systems.
Is it necessary to use a trailer brake controller with a 2019 Ford Ranger?
If your trailer has electric brakes, it is necessary to use a trailer brake controller with your 2019 Ford Ranger. The brake controller allows you to control the braking force of the trailer and ensure that it is braking safely and effectively.
Can I use a weight distribution hitch with a 2019 Ford Ranger?
Yes, you can use a weight distribution hitch with a 2019 Ford Ranger. A weight distribution hitch helps to distribute the weight of the trailer evenly across the towing vehicle and can improve stability and control when towing a heavy load.
In conclusion, it is important to understand the 2019 Ford Ranger trailer wiring diagram in order to ensure a safe and secure connection between your towing vehicle and trailer. By following the wiring diagram and installation instructions, you can be confident in your ability to tow safely and effectively. If you have any questions or concerns about towing with your Ranger, consult your owner’s manual or a trusted mechanic for guidance.
