If you’re looking to replace or upgrade the speakers on your 2017 Ram 1500 pickup truck, you’ll need a speaker wiring diagram. The diagram shows the layout and color codes for the various wires that run from the head unit to the speakers.
Understanding the Wiring Diagram
Before we dive into the details of the wiring diagram, it’s important to understand a few terms. The head unit is the stereo receiver, and the speakers are the devices that produce sound. Each speaker has two wires, a positive wire and a negative wire.
The wiring diagram shows the color codes for each wire, so you can easily identify which wire corresponds to each speaker. The wire colors are standard across most car stereo systems, but it’s always a good idea to double-check before making any connections.
Here’s a breakdown of the wire colors and their corresponding functions:
| Wire Color | Function |
|---|---|
| Black | Negative (-) |
| White | Left Front Positive (+) |
| Gray | Right Front Positive (+) |
| Green | Left Rear Positive (+) |
| Purple | Right Rear Positive (+) |
Removing Old Speakers
Before you install new speakers, you’ll need to remove the old ones. This involves disconnecting the wires from the old speaker and removing any mounting hardware.
To remove the speaker, you’ll need to access it from the door panel. Start by removing any screws or clips that hold the panel in place. Once you’ve removed the panel, you should be able to see the speaker and the wires connected to it.
Disconnect the wires from the speaker by either pulling them out of the connectors or using a wire cutter to snip them. Be sure to label the wires so you know which one goes where.
Next, remove the mounting hardware that holds the speaker in place. This may involve unscrewing bolts or removing clips. Once the hardware is removed, you should be able to pull the speaker out of the mounting bracket.
Installing New Speakers
Once you’ve removed the old speakers, it’s time to install the new ones. Start by mounting the new speaker into the bracket using the same hardware that you removed from the old speaker.
Next, connect the wires to the corresponding terminals on the new speaker. Be sure to match the positive and negative wires correctly to avoid any polarity issues.
Once the wires are connected, test the speaker by turning on the stereo and playing some music. If everything sounds good, you’re ready to reassemble the door panel and move on to the next speaker.
Frequently Asked Questions
Q: What size speakers fit in a 2017 Ram 1500?
A: The 2017 Ram 1500 has speaker sizes of 6×9 inches in the front doors and 5.25 inches in the rear doors. However, some models may have different speaker sizes, so it’s always a good idea to double-check before purchasing new speakers.
Q: Can I install aftermarket speakers in my 2017 Ram 1500?
A: Yes, you can install aftermarket speakers in your 2017 Ram 1500. Just be sure to choose speakers that are the correct size and have a compatible impedance with your stereo.
Q: Do I need any special tools to install new speakers?
A: You’ll need a few basic tools, such as a screwdriver and wire cutters. You may also want to use a panel removal tool to help remove the door panel without damaging it.
Q: How do I know which wire is positive and which is negative?
A: The wire colors are standard across most car stereo systems, but you can double-check by using a multimeter to test the wires. The positive wire should read a higher voltage than the negative wire.
