The 2015 Ford F150 is a powerful and reliable truck that deserves proper maintenance and upgrades. One of the most common upgrades is installing new tail lights. However, before you do that, you need to know how to wire them properly. In this article, we will provide you with a detailed wiring diagram for the 2015 F150 tail lights, including diagrams, tables, and FAQs. Let’s get started!
Wiring Diagram
Before we start with the wiring diagram, let’s go over the basic components that you will need:
| Component | Description |
|---|---|
| Tail light assembly | Contains the bulbs, wiring, and connectors |
| Wire cutters/strippers | To cut and strip the wires |
| Electrical tape | To insulate and protect the wires |
| Fuse tap | To tap into the vehicle’s electrical system |
| Fuse | To protect against overloading the circuit |
Now, let’s take a look at the wiring diagram:
| Tail Light Wire | Color | Function |
|---|---|---|
| Tail Light | Brown | Running Light |
| Brake Light | Red/White | Brake Light |
| Turn Signal | Green/White | Left Turn Signal |
| Turn Signal | Green/Yellow | Right Turn Signal |
| Reverse Light | Black/Pink | Reverse Light |
Now that you have the wiring diagram, you can start connecting the wires. Here are the steps:
Step 1: Disconnect the Battery
Before you start working on the wiring, it’s important to disconnect the battery to avoid any electrical shocks or short circuits.
Step 2: Remove the Tail Lights
To access the wiring, you need to remove the existing tail lights. Use a screwdriver to remove the screws and gently pull the tail light assembly out of the truck.
Step 3: Cut and Strip the Wires
Using wire cutters/strippers, cut the wires from the tail light assembly. Make sure to leave enough wire for splicing and stripping. Strip the wires to expose the metal conductors.
Step 4: Connect the Wires
Using the wiring diagram as a guide, connect the wires from the new tail light assembly to the corresponding wires from the truck. Use electrical tape to insulate and protect the connections.
Step 5: Install the Fuse Tap
The new tail lights may require more power than the existing electrical system can provide. To tap into the electrical system, use a fuse tap. Insert the fuse tap into the fuse box and install a fuse to protect against overloading the circuit.
Step 6: Test the Tail Lights
Before installing the new tail lights, test the wiring to ensure that everything is connected properly. Reconnect the battery and turn on the headlights, running lights, brake lights, and turn signals. If everything works properly, you can install the new tail light assembly.
FAQs
1. Can I install LED tail lights on my 2015 F150?
Yes, you can install LED tail lights on your 2015 F150. However, you need to make sure that they are compatible with your truck’s electrical system. Also, be aware that some LED tail lights may require additional wiring or modifications.
2. How do I know if my tail light assembly is faulty?
If your tail lights are not working properly, it could be due to a faulty tail light assembly. Here are some signs to look out for:
- Dim or flickering tail lights
- Broken or cracked tail light lenses
- Water or moisture inside the tail light assembly
- No response when pressing the brake pedal or turning on the turn signal
3. How often should I check my tail lights?
You should check your tail lights regularly, especially before long trips or in bad weather conditions. It’s important to make sure that your tail lights are working properly to avoid accidents and ticket fines. A good rule of thumb is to check your tail lights every time you fill up your gas tank.
4. Can I fix a broken tail light assembly?
It depends on the severity of the damage. If the tail light assembly is cracked or broken, you may be able to repair it with epoxy or clear tape. However, if the damage is severe or affects the wiring, it’s best to replace the entire tail light assembly.
5. Do I need any special tools to install new tail lights?
No, you don’t need any special tools to install new tail lights. However, you will need wire cutters/strippers, electrical tape, and a fuse tap. It’s also a good idea to have a screwdriver and a wrench on hand, in case you need to remove any parts to access the wiring.
Now you know how to wire the tail lights on your 2015 F150. Always follow the wiring diagram and take the proper safety precautions when working with electricity. If you’re not comfortable with wiring, it’s best to consult a professional mechanic. Stay safe and happy driving!
