Are you looking for the wiring diagram of your 2012 Subaru Legacy radio? Then you have come to the right place. In this article, we will provide a comprehensive guide on the wiring diagram of your 2012 Subaru Legacy radio. Whether you want to install a new radio or troubleshoot an existing one, this guide will help you make informed decisions.
Overview of the 2012 Subaru Legacy Radio
The 2012 Subaru Legacy comes with a standard AM/FM stereo system that includes a single-disc CD player and four speakers. The premium audio system, on the other hand, includes a Harman/Kardon 9-speaker system, HD Radio, and SiriusXM Satellite Radio. Regardless of the type of radio, the wiring diagram is the same.
2012 Subaru Legacy Radio Wiring Diagram
The wiring diagram of your 2012 Subaru Legacy radio is shown below. It includes the color codes of each wire, which will help you identify the wiring connections. The wiring diagram corresponds to the standard AM/FM stereo system. If you have the premium audio system, the wiring diagram may be slightly different.
| Wire Color | Function |
|---|---|
| Red | Accessory 12V |
| Yellow | Battery 12V |
| Blue/White | Remote Turn-On |
| Orange | Illumination |
| Black | Ground |
| White/Black | Left Front Speaker Positive |
| White | Left Front Speaker Negative |
| Gray/Black | Right Front Speaker Positive |
| Gray | Right Front Speaker Negative |
| Green/Black | Left Rear Speaker Positive |
| Green | Left Rear Speaker Negative |
| Purple/Black | Right Rear Speaker Positive |
| Purple | Right Rear Speaker Negative |
Frequently Asked Questions (FAQ)
1. Can I install an aftermarket radio in my 2012 Subaru Legacy?
Yes, you can. However, you will need to obtain a wiring harness and possibly an antenna adapter to connect your new radio to the existing wiring harness. You may also need a mounting kit to install the new radio in the dash. We recommend consulting a professional installer if you are not familiar with the process.
2. How do I troubleshoot my 2012 Subaru Legacy radio?
If your radio is not working properly, try the following troubleshooting steps:
- Check the fuse of the radio
- Check the wiring connections
- Reset the radio by disconnecting the battery for a few minutes
- If the above steps do not work, consult a professional installer or a Subaru dealer
The standard audio system includes a single-disc CD player and four speakers. The premium audio system, on the other hand, includes a Harman/Kardon 9-speaker system, HD Radio, and SiriusXM Satellite Radio. The premium audio system also has a larger touch screen display.
4. Can I add Bluetooth to my 2012 Subaru Legacy radio?
Yes, you can. There are several aftermarket Bluetooth adapters that can be added to the existing radio system. You will need to obtain a wiring harness and possibly an antenna adapter to connect the Bluetooth adapter to the existing wiring harness. We recommend consulting a professional installer if you are not familiar with the process.
5. How do I remove the radio from my 2012 Subaru Legacy?
To remove the radio from your 2012 Subaru Legacy, follow these steps:
- Disconnect the negative battery cable
- Remove the trim panel surrounding the radio
- Remove the screws holding the radio in place
- Disconnect the wiring harness and antenna cable from the back of the radio
- Remove the radio from the dash
Conclusion
In this article, we have provided a comprehensive guide on the wiring diagram of your 2012 Subaru Legacy radio. Whether you want to install a new radio or troubleshoot an existing one, we hope that this guide has been helpful. If you have any further questions or concerns, do not hesitate to consult a professional installer or a Subaru dealer.
