2009 Subaru Forester Radio Wiring Diagram

Subaru Forester is a compact crossover SUV manufactured by Subaru since 1997. It has been popular among drivers who enjoy outdoor activities and has been awarded numerous safety awards. In this article, we are going to discuss the 2009 Subaru Forester radio wiring diagram.

Introduction

The 2009 Subaru Forester comes with a standard AM/FM stereo with a CD player. However, some models come with an optional navigation system and/or a premium sound system. To install an aftermarket radio, a wiring diagram is essential.

What is a Wiring Diagram?

A wiring diagram is a comprehensive illustration that shows the electrical connections, wire colors, and function of each wire in a circuit. It helps the installer to identify which wires are for power, ground, signal, and so on. Wiring diagrams vary depending on the vehicle make and model.

Why You Need a Wiring Diagram for Your 2009 Subaru Forester?

If you are planning to install an aftermarket radio, you need to know the correct wiring connections. Otherwise, you may damage your car’s electrical system or cause the radio to malfunction. A wiring diagram will help you to:

  • Identify the wire color code
  • Connect the wires correctly
  • Test the system before reassembling the dashboard

Where to Find the Wiring Diagram for Your 2009 Subaru Forester?

You can find the wiring diagram for your 2009 Subaru Forester in the owner’s manual or on the manufacturer’s website. You can also purchase a wiring diagram from an aftermarket provider.

2009 Subaru Forester Radio Wiring Diagram

The following table shows the wiring connections for the 2009 Subaru Forester radio. This diagram is for the standard radio without the navigation system and premium sound system.

Wire Color Function Connector Location/Type
Red 12VDC Battery Power Radio Harness/E1 Pin 19
Yellow 12VDC Ignition Power Radio Harness/E1 Pin 6
Black Ground Radio Harness/E1 Pin 1
White/Black Left Front Speaker (+) Radio Harness/E2 Pin 17
White/Red Left Front Speaker (-) Radio Harness/E2 Pin 18
Green/Black Right Front Speaker (+) Radio Harness/E2 Pin 5
Green/Red Right Front Speaker (-) Radio Harness/E2 Pin 6
Violet/Black Left Rear Speaker (+) Radio Harness/E2 Pin 10
Violet/Red Left Rear Speaker (-) Radio Harness/E2 Pin 9
Yellow/Black Right Rear Speaker (+) Radio Harness/E2 Pin 2
Yellow/Red Right Rear Speaker (-) Radio Harness/E2 Pin 1

Conclusion

In conclusion, the 2009 Subaru Forester radio wiring diagram is essential for installing an aftermarket radio. It helps the installer to identify the correct wiring connections and prevent a potential electrical hazard. The table above shows the wiring connections for the standard radio without the navigation system and premium sound system. If you have a different model or trim level, make sure to check the wiring diagram for that specific model.

FAQ

1. Can I install an aftermarket radio in my 2009 Subaru Forester?

Yes, you can install an aftermarket radio in your 2009 Subaru Forester. However, you need to make sure you have the correct wiring diagram and tools.

2. Do I need to disconnect the battery before installing a new radio?

Yes, you need to disconnect the battery before installing a new radio to prevent any electrical damage.

3. How do I test the radio after installing it?

You can test the radio after installing it by turning on the ignition and checking if the radio turns on and plays. You can also test each speaker by playing a sound and checking if it comes out of the correct speaker.

4. What should I do if I encounter a problem during the installation?

If you encounter a problem during the installation, you should refer to the wiring diagram and double-check your connections. You can also check online forums or seek professional help.

5. How long does it take to install a new radio in a 2009 Subaru Forester?

The time it takes to install a new radio in a 2009 Subaru Forester depends on your skill level and the complexity of the installation. It can take anywhere from 30 minutes to a few hours.