Jeep Cherokee is a compact SUV that was introduced in 1984 by American automaker Jeep. The fourth generation of the Cherokee was manufactured between 1999 and 2004. The 2000 Jeep Cherokee is a popular model among Jeep enthusiasts, but it is not free from electrical issues.
One of the most common electrical issues faced by 2000 Jeep Cherokee owners is power window malfunction. A power window system consists of a motor, a switch, and a regulator that helps to raise or lower the window. This article will provide a detailed power window wiring diagram for a 2000 Jeep Cherokee, along with frequently asked questions (FAQs) related to this topic.
How to Fix Power Window Malfunction in a 2000 Jeep Cherokee?
Power window malfunction in a 2000 Jeep Cherokee can be caused by several reasons, such as a faulty switch, a broken motor or regulator, a blown fuse, or a wiring issue. Here are the steps to diagnose and fix power window malfunction in a 2000 Jeep Cherokee:
- Check the fuse: The power window fuse is located in the fuse box under the dashboard on the driver’s side. Use a fuse tester or a voltmeter to check if the fuse is blown or not. If it is blown, replace it with a new one.
- Check the switch: Remove the switch panel from the door panel and check if the switch is functioning properly. You can use a multimeter to check if the switch is sending power to the motor or not. If the switch is faulty, replace it with a new one.
- Check the motor: If the switch is working properly, check the motor by applying 12 volts directly to it. If the motor doesn’t run, it is likely that the motor is faulty and needs to be replaced.
- Check the regulator: If the motor is working properly, check the regulator by moving the window up and down manually while listening for any unusual sounds. If the regulator is making noise or not moving smoothly, it may be broken and needs to be replaced.
- Check the wiring: If everything else is working fine, check the wiring for any loose or damaged connections. Repair or replace any damaged wiring as necessary.
Power Window Wiring Diagram for a 2000 Jeep Cherokee
| Wire color | Function |
|---|---|
| Gray | Power Window Motor Feed |
| Brown/White | Power Window Motor Feed |
| Violet/White | Power Window Motor Feed |
| Pink/Black | Power Window Motor Feed |
| White/Black | Power Window Motor Ground |
| Dark Blue/Orange Stripe | Power Window Motor Ground |
| Green/Black Stripe | Power Window Motor Ground |
| Yellow/Black Stripe | Power Window Motor Ground |
| Dark Blue/White Stripe | Power Window Switch Feed |
| Dark Blue/Yellow Stripe | Power Window Switch Feed |
| Black | Power Window Switch Ground |
| White | Power Window Switch Ground |
| Brown | Power Window Switch Ground |
| Light Green/Red Stripe | Driver Door Module |
The power window wiring diagram for a 2000 Jeep Cherokee consists of different colored wires that connect the motor, switch, and regulator. Each wire performs a specific function, and any damage or short-circuit in the wiring can cause power window malfunction.
FAQs about 2000 Jeep Cherokee Power Window Wiring Diagram
Q. How much does it cost to replace a power window motor in a 2000 Jeep Cherokee?
A. The cost of replacing a power window motor in a 2000 Jeep Cherokee varies depending on the location and the mechanic. On average, it can cost between $150 and $350, including parts and labor.
Q. How do I remove the power window switch panel in a 2000 Jeep Cherokee?
A. To remove the power window switch panel in a 2000 Jeep Cherokee, you need to pry it out carefully using a flat-head screwdriver. Once the panel is loose, disconnect the wiring harness and remove the panel from the door panel.
Q. Can I manually operate a power window in a 2000 Jeep Cherokee?
A. Yes, you can manually operate a power window in a 2000 Jeep Cherokee by removing the door panel and accessing the regulator. You need to disconnect the motor and manually raise or lower the window. However, this should be done only in emergency situations, and it is recommended to get the power window fixed as soon as possible.
Q. How can I prevent power window malfunction in a 2000 Jeep Cherokee?
A. To prevent power window malfunction in a 2000 Jeep Cherokee, you should regularly inspect the power window system and keep it well-maintained. Ensure that the switch and regulator are functioning properly, and there are no loose or damaged wiring connections. Also, avoid slamming the door, which can cause damage to the regulator or motor.
Q. Can power window malfunction in a 2000 Jeep Cherokee be fixed at home?
A. Yes, power window malfunction in a 2000 Jeep Cherokee can be fixed at home, but it requires some basic knowledge of electrical systems and automotive repair. If you are not confident, it is recommended to take your vehicle to a certified mechanic or dealership.
